ABB 24 V dc Safety Relay With 2 Safety Contacts Compatible With Light Beam/Curtain, Safety Switch/Interlock

  • RS-artikelnummer 733-2436
  • Tillv. art.nr 2TLA020052R1000
  • Tillverkare / varumärke ABB
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Vital Safety Controller, Base Unit

The Vital safety device from ABB is the heart of a new solution which makes it possible to install/connect many different types of safety device in the same safety circuit and still achieve safety category 4 in accordance with EN 954-1/EN ISO 13849-1. The Vital module is based upon a dynamic single-channel concept as opposed to conventional dual-channel safety relays. ABB have designed this unit to accommodate up to 30 dynamic sensors within the safety circuit which can be supervised by one Vital module. The Vital unit can therefore replace several safety relays. Safety components with output contacts can be connected to the Vital via low cost Tina adaptors. The Vital also has automatically or manually supervised reset selection, dual safety outputs, and an information output for reset indication and status information for PLC's.

Cost-effective cable routing/connections
Information output with two functions
LED indication of: power supply, dynamic signal and outputs
Detachable connector blocks
Two NO safety outputs
Manually supervised or automatic reset
Can accommodate long cable lengths
Standard width: 22.5 mm
IP40 protection class rating
A mechanical life of >107 operations
Safety category 4, according to EN 954-1/EN ISO 13849-1 dynamic safety circuit

Note

Unused ports on the Tina 4A and 8A must be blanked by using a Tina 1A blanking plug.

Approvals

UL, CSA

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Function Light Beam/Curtain, Safety Switch/Interlock
Safety Contacts 2
Reset Method Automatic, Manual
Terminal Type Screw
Width 84mm
Length 22.5mm
Depth 120mm
22 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 504,24 kr
(exkl. moms)
3 130,30 kr
(inkl. moms)
Enheter
Per unit
1 +
2 504,24 kr
Related Products
Detects the stop condition of all types of ...
Description:
Detects the stop condition of all types of AC or DC motor driven machines which, when the motor runs down, produce a residual voltage in the windings. No additional sensor is required1 N/O and 1 N/C contacts, EN954-1 Category 3 ...
2 N/O instantaneous outputs provide stop category 0, ...
Description:
2 N/O instantaneous outputs provide stop category 0, 3 N/O timed contacts provide stop category 1 by allowing controlled deceleration of the motor until a complete stop is achieved4 solid state outputs for PLC signallingMonitored start button featureDelay time: 0 ...
The PNOZ X1 series from PILZ is a ...
Description:
The PNOZ X1 series from PILZ is a reliable and affordable safety relay that will give you the confidence to run your safety circuits in a safe manner. • LED indicator for switching your channel status from 1 to 2 ...
All units conform to BS EN 60204 Part ...
Description:
All units conform to BS EN 60204 Part 1 1993; EN 954-1; IEC 204-1; VDE 0113. Dimensions (mm) for all units: H 96.5, W 22.5, L 114,Contact Rating: 6A for all units. Colour supplied may vary from that shown. Stop ...