Drawn Cup Needle Roller Bearing HK1516B, 15mm I.D, 21mm O.D

  • RS-artikelnummer 137-1739
  • Tillv. art.nr HK1516B
  • Tillverkare / varumärke INA
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): SK
Produktdetaljer

Drawn Cup Needle Roller Bearings

INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit. Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.

Features and Benefits

• Lower operating costs • Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise

Product Application Information

These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity. Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.

Suffixes

2RS - Contact seals on both sides RS - Contact seal on one side
ZW - Double row design, with lubrication hole

INA

Specifikationer
Attribute Value
Inside Diameter 15mm
Outside Diameter 21mm
Roller Bearing Type Drawn Cup Needle
Race Width 16mm
Bore Type Parallel
Material Steel
Static Load Rating 14400N
Cage Material Sheet Steel
Number of Rows 1
Dynamic Load Rating 10500N
End Type Open
Reference Speed 12300rpm
Limiting Speed 16500rpm
Maximum Speed - Oil 16500rpm
Fatigue Limit Load 1780N
Maximum Speed - Grease 9900rpm
Tillfälligt slut i lager – restorder för leverans 2020-05-05
Pris (ex. moms) Each
48,88 kr
(exkl. moms)
61,10 kr
(inkl. moms)
Enheter
Per unit
1 - 4
48,88 kr
5 - 9
46,91 kr
10 - 24
45,98 kr
25 +
45,05 kr
Related Products
SKF Needle Roller Bearings have low sectional height ...
Description:
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size. Needle roller without inner ringNeedle Roller Bearings with flanges in the outer ring and diameters up to and including 17mm are produced with ...
INA from Schaeffler drawn cup roller clutches are ...
Description:
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in ...
These series comprise radial needle roller bearings and ...
Description:
These series comprise radial needle roller bearings and a rolling bearing component capable of supporting axial loads. They can support high radial forces as well as axial forces in one direction, while NKIB can support axial forces from both directions, ...
The bearings comprise drawn outer cups, plastic support ...
Description:
The bearings comprise drawn outer cups, plastic support rings with a concave inner profile, outer rings with a spherical outside surface, needle roller and cage assemblies and removable inner rings. Aligning needle roller bearings are X-life bearings. These bearings have ...