Needle Roller Bearing HK 3520, 35mm I.D, 42mm O.D

  • RS-artikelnummer 514-152
  • Tillv. art.nr HK 3520
  • Tillverkare / varumärke SKF
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): DE
Produktdetaljer

SKF Drawn Cup Needle Roller Bearings Series HK

SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.

Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required

//media.rs-online.com/t_line/L0514035-01.jpg
//media.rs-online.com/t_line/L0514039-01.gif
Specifikationer
Attribute Value
Inside Diameter 35mm
Outside Diameter 42mm
Roller Bearing Type Needle
Race Width 20mm
Bore Type Parallel
Material Metal
Static Load Rating 46.5kN
Cage Material Sheet Steel
Number of Rows 1
Dynamic Load Rating 22.9kN
End Type Open
Maximum Speed - Oil 8000rpm
Maximum Speed - Grease 5600rpm
Fatigue Limit Load 5.6kN
10 I lager för leverans inom 1 arbetsdagar
Inom 2 arbetsdag(ar) (UK lager)
Pris (ex. moms) Each
90,48 kr
(exkl. moms)
113,10 kr
(inkl. moms)
Enheter
Per unit
1 - 4
90,48 kr
5 - 9
86,86 kr
10 - 24
85,10 kr
25 +
83,24 kr
Related Products
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...
INA from Schaeffler drawn cup roller clutches are ...
Description:
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in ...