Thrust Roller Bearing 81102TN, 15mm I.D, 28mm O.D

  • RS-artikelnummer 513-884
  • Tillv. art.nr 81102TN
  • Tillverkare / varumärke SKF
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

SKF Axial Roller Bearings

Cylindrical roller thrust bearings are suitable for arrangements that have to support heavy axial loads.

They are relatively insensitive to shock loads, are very stiff and require little axial space
As standard they are available as single direction bearings and can only accommodate axial loads acting in one direction
These bearings are mainly used where thrust ball bearings have insufficient load carrying capacity

//media.rs-online.com/t_line/L0513884-01.jpg
Specifikationer
Attribute Value
Inside Diameter 15mm
Outside Diameter 28mm
Roller Bearing Type Thrust
Race Width 9mm
Bore Type Parallel
Material Metal
Static Load Rating 27kN
Cage Material Reinforced PA
Number of Rows 1
Dynamic Load Rating 11kN
Reference Speed 4300rpm
Limiting Speed 8500rpm
Fatigue Limit Load 2.45kN
7 I lager för leverans inom 1 arbetsdagar
Inom 2 arbetsdag(ar) (UK lager)
Pris (ex. moms) Each
347,94 kr
(exkl. moms)
434,92 kr
(inkl. moms)
Enheter
Per unit
1 - 4
347,94 kr
5 - 9
334,09 kr
10 - 24
327,05 kr
25 +
320,13 kr
Related Products
SKF Drawn cup needle roller bearings have a ...
Description:
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity. Generally used directly on the shaft, which ...
INA from Schaeffler drawn cup needle roller bearings ...
Description:
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete ...
These bearings are the most basic and most ...
Description:
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on ...
The series designations in accordance with ISO 355 ...
Description:
The series designations in accordance with ISO 355 consist of a digit and two letters. The digit represents the contact angle. The two letters represent the diameter and width series, respectively. This is followed by a three-digit bore diameter d ...