SKF HK 2210 22mm I.D Needle Roller Bearing, 28mm O.D
- RS-artikelnummer:
- 513-733
- Tillv. art.nr:
- HK 2210
- Tillverkare / varumärke:
- SKF
I lager för avsändande samma dag
Nästa dag-leverans inte möjlig
Lagt till varukorgen
Pris (ex. moms) Varje
88,79 kr
(exkl. moms)
110,99 kr
(inkl. moms)
| Enheter | Per unit |
| 1 - 4 | 88,79 kr |
| 5 - 9 | 85,32 kr |
| 10 - 24 | 83,63 kr |
| 25 + | 81,85 kr |
- RS-artikelnummer:
- 513-733
- Tillv. art.nr:
- HK 2210
- Tillverkare / varumärke:
- SKF
Datablad
Lagstiftning och ursprungsland
RoHS-status: Inte relevant
- COO (Country of Origin):
- DE
Produktdetaljer
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
Specifikationer
Attribute | Value |
|---|---|
| Inside Diameter | 22mm |
| Outside Diameter | 28mm |
| Roller Bearing Type | Needle |
| Race Width | 10mm |
| Bore Type | Parallel |
| Material | Metal |
| Static Load Rating | 10.6kN |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 7.21kN |
| End Type | Open |
| Fatigue Limit Load | 1.2kN |
| Maximum Speed - Grease | 8000rpm |
| Maximum Speed - Oil | 12000rpm |