Eccel Technology Ltd RFID Reader OEM-MICODE-USB (000128), Reader/Writer

  • RS-artikelnummer 126-2181
  • Tillv. OEM-MICODE-USB (000128)
  • Tillverkare / varumärke Eccel Technology Ltd
Lagstiftning och ursprungsland
COO (Country of Origin): GB


The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k, Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)


• Complete “plug-and-go” RFID Read / Write system • Integrated PCB antenna, LEDS, RS232 or USB interface.
• Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
• Average current consumption down to 100 micro Amps even when fully active
• Auxiliary output options for automatic data output as serial or Wiegand protocol


DESFire and Mifare PLUS cards are supported for serial number acquisition only.

RFID - Eccel

Attribute Value
Component Type Reader/Writer
Supported Bus Interfaces USB
Supply Voltage 5V
Length 75mm
Width 50mm
50 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
400,88 kr
(exkl. moms)
501,10 kr
(inkl. moms)
Per unit
1 +
400,88 kr
Related Products
The Gemalto (Cinterion®) range of EHS6T 3G M2M ...
The Gemalto (Cinterion®) range of EHS6T 3G M2M plug and play terminals allow for USB (EHS6T-USB) and Ethernet (EHS6T-LAN) connection.The EHS6T terminals are ideal for any designer that is looking for speed, security, flexibility and cost-effectiveness in the development of ...
The Digimatic DMX multiplexer allows users to transmit ...
The Digimatic DMX multiplexer allows users to transmit measurement data to application programs.The application can be used to configure the device used, the measurement frequency etc.This interface, controlled by a microcontroller, is designed to connect a measuring instrument to the ...
The RWD-QT-LP-SMT is a surface mount (SMT) package ...
The RWD-QT-LP-SMT is a surface mount (SMT) package option suitable for modern printed circuit boards. Supports HitagS256, HitagS2048, Hitag1, Hitag2 and EM4XXX transponders at 125 KHz. To be used with baseboard RWD-QT-SMT for evaluation and development.
The TRF7960/61 is an integrated analogue front end ...
The TRF7960/61 is an integrated analogue front end and data-framing system for a 13.56-MHz RFID reader system. Operating Frequency Range: 13.56MHzRF Output Power: +20 or +23dBmAdjustable ASK modulation rangeReceiver band-pass filter with user-selectable corner frequenciesCompletely integrated protocol handlingDual ...