Senaste sökningar

    JSP Particulates Filter Cartridge for use with JSP FORCE8 Respirator Mask BMN740-000-600

    RS-artikelnummer:
    181-2939
    Tillv. art.nr:
    BMN740-000-600
    Tillverkare / varumärke:
    JSP
    JSP
    Se alla Reusable Respirator Filters
    72 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    215,625 kr

    (exkl. moms)

    269,531 kr

    (inkl. moms)

    EnheterPer unitPer Pack*
    2 +215,625 kr431,25 kr
    RS-artikelnummer:
    181-2939
    Tillv. art.nr:
    BMN740-000-600
    Tillverkare / varumärke:
    JSP

    Ej tillämpbart

    COO (Country of Origin):
    CN

    Lagstiftning och ursprungsland

    Ej tillämpbart

    COO (Country of Origin):
    CN

    Produktdetaljer

    PressToCheck™ P3-Filters


    For use with Force 8™ Half Mask RS 879-2937
    Low profile cover protects the enclosed pleated filter from moisture and foreign objects that could damage the pleats
    Bayonet connector
    Reduced breathing resistance
    With an integrated inhalation valve

    P3 Filters (RS 879-2930 )


    High efficiency dust protection
    Particulate protection only

    A2 P3 Filters (RS 879-2934 )


    High efficiency dust protection
    Medium capacity gas / vapour protection

    ABEK1 P3 Filters (RS 879-2943 )


    High efficiency dust protection
    Low capacity gas / vapour protection

    Standards

    EN143

    Forece 8 PressToCheck Filters


    With the new patent pending Force8™ PressToCheck™ filters you can instantly check that you have the correct seal every time.

    How to use Force 8 PressToCheck Filters


    • Comfort FIT IT!
    Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
    • PRESS IT!
    PressToCheck™ - Press the front and backs of both filter covers together to stop air from entering through the filters.
    • CHECK IT!
    Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.

    Applications

    Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as;

    • A- Organic vapours with a boiling point more than 65°C
    • B- Inorganic vapours
    • E- Acid gases
    • K- Ammonia and ammonia derivatives
    • AX- Organic vapours with a boiling point less than 65°C



    Half-mask or full-mask respirators?

    Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.

    However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.

    Correct use of respirators

    When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.


    Specifikationer

    AttributeValue
    Filter TypeParticulates
    For Use WithJSP FORCE8 Respirator Mask
    72 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    215,625 kr

    (exkl. moms)

    269,531 kr

    (inkl. moms)

    EnheterPer unitPer Pack*
    2 +215,625 kr431,25 kr