GP2A230LRS0F Sharp, Snap-In Reflective Sensor, Photointerrupter Output
- RS-artikelnummer:
- 146-0773
- Tillv. art.nr:
- GP2A230LRS0F
- Tillverkare / varumärke:
- Sharp
Denna produkt har utgått
- RS-artikelnummer:
- 146-0773
- Tillv. art.nr:
- GP2A230LRS0F
- Tillverkare / varumärke:
- Sharp
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
GP2A230LRS0F Series are standard, OPIC output, reflective photointerrupters with emittter and detector facing the same direction in a molding that provides non-contact sensing. This family of devices uses light modulation to reduce the affects of disturbing light, and the sensor is optimized to work in the selected focal distance. A 3-pin connector is included to allow remote-mount or off-board designs.
Reflective with OPIC Light Modulated Output
Highlights Includes additional screw fi xing holes, Position pin to prevent mis-alignment, Long focal distance
RoHS directive compliant
Highlights Includes additional screw fi xing holes, Position pin to prevent mis-alignment, Long focal distance
RoHS directive compliant
Specifikationer
Attribute | Value |
|---|---|
| Peak Sensor Distance | 27 (Non-Detection) mm, 9 (Detection) mm |
| Output Device | Photointerrupter |
| Mounting Type | Snap-In |
| Dimensions | 32.8 x 8 x 8mm |
| Height | 8mm |
| Length | 32.8mm |
| Maximum Operating Temperature | +70°C |
| Minimum Operating Temperature | -10°C |
| Width | 8mm |
| Output Signal Type | Analogue |
| Operating Temperature Range | -10 → +70°C |