Hi-Force Single, Portable General Purpose Hydraulic Cylinder, HSS52, 4.5T, 50mm stroke

  • RS-artikelnummer 807-918
  • Tillv. art.nr HSS52
  • Tillverkare / varumärke Hi-Force
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Standard Cylinders

For lifting and pushing applications where flexibility and high cycle requirements exist
Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a diverse range of industries including, mining, power stations, railways shipyards and steelworks.
Service and repair seal kits are available (808-185, 808-179)

//media.rs-online.com/t_line/L807918-01.gif

Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard.
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps

Warning

  • Saftey Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specifikationer
Attribute Value
Manufacturer Series HSS
Single/Double Acting Single
Capacity 4.5t
Stroke 50mm
Closed Height 132mm
Extended Height 182mm
Cylinder Effective Area 14.4cm²
Oil Capacity 32cm³
Outside Diameter 38mm
Maximum Operating Pressure 700 bar
Weight 1.2kg
Tillfälligt slut i lager – restorder för leverans 2020-02-27
Pris (ex. moms) Each
2 618,44 kr
(exkl. moms)
3 273,05 kr
(inkl. moms)
Enheter
Per unit
1 +
2 618,44 kr
Related Products
Hydraulic cylinders with a range of bore sizes ...
Description:
Hydraulic cylinders with a range of bore sizes and stroke lengths for general purpose and light duty applications. Manufactured to ISO 3320 and compatible with ISO mounting styles and fixings. Carbon steel bodyRecommended hydraulic medium: Mineral oil based fluidsNBR (Nitrile)/Polyurethane ...
The through-bore piston design offers the user flexibility ...
Description:
The through-bore piston design offers the user flexibility when selecting equipment to provide a pulling force. This range of cylinders can also be used in the pushing modeThe replacement saddle is threaded to screw into the threaded counter-bore of the ...
Use where collapsed height is a premier requirement ...
Description:
Use where collapsed height is a premier requirement in a lifting, levelling or pushing applicationNon-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity.
Combine minimum collapsed height with optimum strokeThey provide ...
Description:
Combine minimum collapsed height with optimum strokeThey provide a short adjusting and lifting force in confined work areasSteel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension.