SMC Membrane G 1/4 Pneumatic Air Dryer +55°C -5°C, 0.85Mpa

  • RS-artikelnummer 667-9306
  • Tillv. IDG10-F02
  • Tillverkare / varumärke SMC
Lagstiftning och ursprungsland

IDG Series, Membrane Air Dryer

SMC's Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.

A reliable, efficient and an economical alternative to pressure swing and refrigerant dryer technologies.

Compact and lightweight
No power supply required
Discharged air noise reduced with in-built silencer
No vibration or heat discharge
Modular design for additional filtration
Membrane air dryer series
Single unit style
Various sizes available
Port sizes: 1/8" to 1/2"


Flow rates measured as outlet/purge l/min

Dry Air Systems

Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.

Attribute Value
Manufacturer Series IDG
Type Membrane
Inlet Port Size G 1/4
Outlet Port Size G 1/4
Dew Point -20°C
Typical Flow Rate 25 (Purge) L/min, 100 (Outlet) L/min
Maximum Ambient Operating Temperature +55°C
Minimum Ambient Operating Temperature -5°C
Minimum Process Operating Temperature -5°C
Minimum Operating Inlet Pressure 0.3MPa
Process Operating Temperature Range -5 → +55°C
Maximum Operating Inlet Pressure 0.85MPa
Maximum Process Operating Temperature +55°C
Inlet Port Thread Standard G
Ambient Operating Temperature Range -5 → +55°C
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
6 536,32 kr
(exkl. moms)
8 170,40 kr
(inkl. moms)
Per unit
1 +
6 536,32 kr
Related Products
Designed to provide a cost effective alternative to ...
Designed to provide a cost effective alternative to hand drying these new dryers have been developed with speed in mind. They provide a rapid drying time of 10-12 seconds, almost half that of competitors products, thus reducing washroom time. Tempest ...
The Mitsubishi Jet Towel Smart Hand Dryer is ...
The Mitsubishi Jet Towel Smart Hand Dryer is an excellent, class leading hand dryer, with a number of innovative features which result in short drying times, highly efficient running costs and hygienic operation. The Jet Towel Smart is a 'hands-under' ...
The Vent-Axia jet dry plus hand dryer is ...
The Vent-Axia jet dry plus hand dryer is an automatic, double-sided, high-speed and just 10 seconds dry time device. It is designed to provide a cost-effective alternative to conventional hand dryers and paper towels. It is an advanced and quick ...
The Vent-Axia Ultradry® SX hand and face dryer ...
The Vent-Axia Ultradry® SX hand and face dryer is automatic stainless steel, no-touch, vandal-resistant device. It is designed for offices, shops, restaurants, pubs, clubs and hospitals. This dryer is available with a height of 264mm, the width of 275mm and ...