Pepperl + Fuchs Terminating Resistor for use with Industrial Sensor AS-Interface

  • RS-artikelnummer 126-3488
  • Tillv. art.nr VAZ-G10-TERM
  • Tillverkare / varumärke Pepperl + Fuchs
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): ID
Produktdetaljer

Accessories

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifikationer
Attribute Value
Accessory Type Terminal Resistor
For Use With Industrial Sensor AS-Interface
Termination Screw
Cable Length 1m
Series VAZ
Application Industrial
Tillfälligt slut i lager – restorder för leverans 2019-12-16
Pris (ex. moms) Each
950,00 kr
(exkl. moms)
1 187,50 kr
(inkl. moms)
Enheter
Per unit
1 +
950,00 kr
Relaterte Produkter
All PanelView Component models have RS-232 and RS-422/RS-485 ...
Description:
All PanelView Component models have RS-232 and RS-422/RS-485 ports to communicate over serial networks to MicroLogix and SLC series controllers. The C600 and C1000 models offer an additional Ethernet port supporting Ethernet communication. The design software resides in the terminals ...
Enables quick and easy interconnection to PLC's and ...
Description:
Enables quick and easy interconnection to PLC's and expansion modules20 pin (for CPU 312 models, excl. 32 channel types) and 40 pin connectors may be coded to fit certain module types to help prevent incorrect connection of wiringRetention mechanism to ...
Display for Modicon M168 parametric logic controllers or ...
Description:
Display for Modicon M168 parametric logic controllers or generic programmable logic controllers.The remote display units communicate via the expansion bus. They can be powered electrically via the controllers or from an external source. Two versions of display units availableTM168 GDB: ...
Display for Modicon M168 parametric logic controllers or ...
Description:
Display for Modicon M168 parametric logic controllers or generic programmable logic controllers.The remote display units communicate via the expansion bus. They can be powered electrically via the controllers or from an external source. Two versions of display units availableTM168 GDB: ...