Pepperl + Fuchs Interface Module for use with Industrial Sensor AS-Interface

  • RS-artikelnummer 126-3484
  • Tillv. VAZ-2T1-FK-G10-2M-PUR-V1-W
  • Tillverkare / varumärke Pepperl + Fuchs
Lagstiftning och ursprungsland
COO (Country of Origin): VN


Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Attribute Value
Accessory Type AS-Interface Splitter Box
For Use With Industrial Sensor AS-Interface
Series VAZ
Application Industrial
Cable Length 2m
Termination Plug-In
4 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
285,00 kr
(exkl. moms)
356,25 kr
(inkl. moms)
Per unit
1 +
285,00 kr
Relaterte Produkter
Network virtually any device in minutesAccess, monitor and ...
Network virtually any device in minutesAccess, monitor and control equipment over EthernetReplace dedicated PCs and/or modem lines with fast and reliable Ethernet networkingConfigure quickly and easily via HTTP, DHCP, Telnet, serial or Lantronix DeviceInstaller™ utilitySupports RS-232, RS-422 and RS-485 ...
High speed Serial-to-Ethernet gateway module with an RJ-45 ...
High speed Serial-to-Ethernet gateway module with an RJ-45 jackHigh stability and reliability Ethernet connection solution10/100Mbps Ethernet interface supported with full hardwired TCP/IP stack chip W5100Up to 230Kbps serial communication interfaceSerial configuration commands support: Simple command frame ...
Mechanical modules to record power modulesTo mount upright ...
Mechanical modules to record power modulesTo mount upright wiring kit via self-constructing potential railsPositive interconnection technologyReplaceable terminal box, even from middle of station networkHigh data security with self-constructing shield coverage on the back-plane busOption to colour-code the ...
Enables quick and easy interconnection to PLC's and ...
Enables quick and easy interconnection to PLC's and expansion modules20 pin (for CPU 312 models, excl. 32 channel types) and 40 pin connectors may be coded to fit certain module types to help prevent incorrect connection of wiringRetention mechanism to ...