Murata MGK Non-Isolated DC-DC Converter, 8 → 14 V dc Input, Surface Mount, +85°C Max Temp -40°C Min Temp
- RS-artikelnummer:
- 135-8881
- Tillv. art.nr:
- MYMGK1R820ERSR
- Tillverkare / varumärke:
- Murata
Denna produkt har utgått
- RS-artikelnummer:
- 135-8881
- Tillv. art.nr:
- MYMGK1R820ERSR
- Tillverkare / varumärke:
- Murata
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPUs, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
Features and Benefits
• Programmable output voltage from 0.7-1.8 V dc
• Up to 20 Amps of output current
• Quick response to load change
• Ultra-small surface mount package
• 10.5 x 9.0 x 5.6 mm
• High efficiency of 89.2 %(*FRSR), 87.8 %(*ERSR)
• Outstanding thermal derating performance
• Overcurrent protection
• On/Off control (Positive logic)
• Power Good signal
• RoHS-6 hazardous substance compliance
• High Reliability / Heat Shock Testing
• 700 cycle (-40 to +125 °C)
• Up to 20 Amps of output current
• Quick response to load change
• Ultra-small surface mount package
• 10.5 x 9.0 x 5.6 mm
• High efficiency of 89.2 %(*FRSR), 87.8 %(*ERSR)
• Outstanding thermal derating performance
• Overcurrent protection
• On/Off control (Positive logic)
• Power Good signal
• RoHS-6 hazardous substance compliance
• High Reliability / Heat Shock Testing
• 700 cycle (-40 to +125 °C)
Specifikationer
Attribute | Value |
---|---|
Input Voltage Range | 8 → 14 V dc |
Input Voltage Nominal | 12 V dc |
Mounting Type | Surface Mount |
Number of Outputs | 1 |
Series | MGK |
Standards Met | CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1 |
Minimum Temperature | -40°C |
Maximum Temperature | +85°C |
Efficiency | 87.8% |
- RS-artikelnummer:
- 135-8881
- Tillv. art.nr:
- MYMGK1R820ERSR
- Tillverkare / varumärke:
- Murata