- RS-artikelnummer:
- 141-1995
- Tillverkare / varumärke:
- RS PRO
300 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Varje
647,76 kr
(exkl. moms)
809,70 kr
(inkl. moms)
Enheter | Per unit |
1 - 4 | 647,76 kr |
5 + | 608,92 kr |
Kalibrerade alternativ:
- Typ av kalibrering:
- RSCAL
- RS-artikelnummer
- 141-1997
Pris (ex. moms) Varje
1 293,76 kr
(exkl. moms)
1 617,20 kr
(inkl. moms)
- RS-artikelnummer:
- 141-1995
- Tillverkare / varumärke:
- RS PRO
Lagstiftning och ursprungsland
- COO (Country of Origin):
- DK
Produktdetaljer
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.
Features and Benefits:
Voltage Range: 230 V ac - 1000 V ac
Sensitivity: Illuminates red at 4 mm distance from wire carrying 230 V ac
Power: 2 x AAA batteries (Included)
Altitude: < 2000 m
RH: 80% @ 30°C, 50% @ 40°C
Operating Temperature: -20°C to +40°C
Over Voltage: CAT III 1000 V
Weight: 50 gm
Length: 151 mm
Diameter: 18 mm
IEC61010-1 CAT III 1000 V ac
Sensitivity: Illuminates red at 4 mm distance from wire carrying 230 V ac
Power: 2 x AAA batteries (Included)
Altitude: < 2000 m
RH: 80% @ 30°C, 50% @ 40°C
Operating Temperature: -20°C to +40°C
Over Voltage: CAT III 1000 V
Weight: 50 gm
Length: 151 mm
Diameter: 18 mm
IEC61010-1 CAT III 1000 V ac
Note
Only use with GP Alkaline GN24A, LR03, Size AAA
What is a non contact voltage tester used for?
Locating breaks in cables
Detecting blown fuses inside plugs of fuse holders
Distinguishing between live and neutral wires in both single and 3 phase supply
Identifying faulty inline switches
Checking function of circuit breakers
Locating defective in-series light bulbs
Detecting blown fuses inside plugs of fuse holders
Distinguishing between live and neutral wires in both single and 3 phase supply
Identifying faulty inline switches
Checking function of circuit breakers
Locating defective in-series light bulbs
Note
Only use with GP Alkaline GN24A, LR03, Size AAA
Specifikationer
Attribute | Value |
---|---|
Indicator Type | Voltage |
Battery Type | AAA |
ATEX Approval | Yes |
Power Source | Battery |
Safety Category | CAT III 1000 V ac |
Weight | 50g |
Diameter | 18mm |
Length | 151mm |
Maximum Detection Voltage | 1000V ac |
Maximum Operating Temperature | +40°C |
Minimum Detection Voltage | 230V ac |
Safety Category Voltage | 1000V ac |
Safety Category Level | CAT III |
Minimum Operating Temperature | -20°C |