PSENmag Magnetic Safety Switch, Plastic, 24 V dc

  • RS-artikelnummer 824-4914
  • Tillv. art.nr 506405
  • Tillverkare / varumärke Pilz
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CH
Produktdetaljer

Pilz Non-contact Switch

The Pilz PSENmag series non-contact safety switch has an assured switching distance of 3mm. It has 1NO/1NC safety contact. It meets the highest safety requirements and offers a complete solution that is safe and economical.
Supplied with actuator
Caution:
EN60947-5-3 standard is only met if the entire system consisting of a safety switch (PSENmag), an actuator (PSENmag) and a safety-monitoring module (PNOZ X) is used.
Note:
Only stock nos. 744-8702 and 824-4918 have an LED.

Features and Benefits

Input The supply voltage is 24VDC
Connected via a plug connection or with cable
Flexible cable outlet, including connector, so there is no need for an angled connector
Flexible mounting, both the sensor and actuator support every conceivable mounting configuration
Cost effective because of the series connection
Extra signal contact
Connection type is M8, 4-pin male
Housing material is Plastic
Operating temperature ranges between -25°C and 70°C

Applications

Heavy soiling

Certifications

IP65 rated
IP67 rated
EN954-1 (Cat 4)
EN60204-1
EN60947-5-3
ATEX approved
Electrosuisse certified
CE certified
UL approved
TÜV certified
BG certified
CCC certified

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Safety Contacts NO/NC
Housing Material Plastic
Connection Type M8
Switch Type Square
Range PSENmag
Terminal Type PCB Pin
Switching Distance 3 mm
IP Rating IP67
Actuator Included Yes
Width 26mm
Sensor Principle Magnetic
Safety Category 4
Length 36mm
Depth 13mm
Actuator Type Magnetic
Housing Colour Yellow
Dimensions 36 x 26 x 13 mm
39 I lager för leverans inom 1 arbetsdagar
Inom 2 arbetsdag(ar) (UK lager)
Pris (ex. moms) Each
543,45 kr
(exkl. moms)
679,31 kr
(inkl. moms)
Enheter
Per unit
1 +
543,45 kr
Related Products
Control category up to 3 to EN954-1Output function ...
Description:
Control category up to 3 to EN954-1Output function indicated at rear of switch by LEDIP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm.
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
Substitutes door handle and safety switch in one ...
Description:
Substitutes door handle and safety switch in one IP67 rated unit, no further door fittings requiredIdeal for small and light movable guards (rotating doors max. 5kg, sliding doors max. 3kg) Tamper-proof due to integral coded safety sensorControl category up to ...
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiringPossible to provide protection against defeat in accordance with VDE 060 by concealing the installationSimplified installation and adjustmentFor use in EX area Category ...