RS PRO Multimeter Test Lead Test Lead Kit, Fused, CAT III 600V

  • RS-artikelnummer 731-5273
  • Tillverkare / varumärke RS PRO
Lagstiftning och ursprungsland
COO (Country of Origin): GB

RS PRO Multimeter Lead Set in Pouch

RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard.

RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.

Contents Standard Set

2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black).
Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA.

Also available:
Thin fine insulated prods set 262-7770 for use with fused test prods and multimeter test lead sets
Shuttered lantern probe set 262-7786 for use with fused test prods and multimeter test lead sets.

Typical applications
Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.
Test and Measurement

Safety Precautions
Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.


EC 1010 Cat III 600V; GS38


  • Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance.
Attribute Value
Lead Type Test Lead Kit
Connector Type Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug
Fused Yes
Lead Length 1.2m
Safety Category Voltage 600V
Safety Category CAT III 600V
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Safety Category Level CAT III
83 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
612,44 kr
(exkl. moms)
765,55 kr
(inkl. moms)
Per unit
1 +
612,44 kr
Related Products
Fluke 179 True RMS digital multimeter kit is ...
Fluke 179 True RMS digital multimeter kit is the preferred choice for electrical engineers, industrial and commercial electricians. Fluke 179 multimeter offers a digital display with analogue bar graph, backlight and built in temperature measurements. Contains features to help you ...
Brought to you by Fluke, a range of accessories including test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of ...
Multi-head test lead set with 4 probe profiles ...
Multi-head test lead set with 4 probe profiles to choose fromInterchangeable and reversible probe heads allow multiple combinations of connection and contactConsists of a sprung point to 4mm plug (with hard point), which is reversible2mm and 2.4mm plugsEach probe screws ...
The TLK291 test probe kit ensures optimum readings ...
The TLK291 test probe kit ensures optimum readings for the 9040 Fluke voltage tester. The Fluke 9040 is an effective tool for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical ...