Fluke I30 Multimeter Current Clamp Adapter, 30A dc, 30A ac, 19mm With RS Calibration

  • RS-artikelnummer 654-1377
  • Tillv. art.nr FLUKE I30
  • Tillverkare / varumärke Fluke
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): CN
Produktdetaljer

i30 30A High Resolution, High Bandwidth Current Probe

The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.

Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
1.5m flying lead terminated with 4mm shrouded plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A

Supplied with

Alkaline PP3 battery and operators manual.

Warning

  • Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.
Specifikationer
Attribute Value
Adapter Type AC/DC
Maximum DC Current 30A
Maximum AC Current 30A ac
Best Accuracy ±1% + 2 mA
Resolution 1 mA
Maximum Conductor Size 19mm
Calibrated RSCAL
Safety Category CAT III 300 V
Output Type Current
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 30 h
Cable Length Extended 1.5m
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Model Number p I30
Safety Category Voltage 300V
Safety Category Level CAT III
Tillfälligt slut i lager – restorder för leverans 2020-03-19
Pris (ex. moms) Each
4 781,00 kr
(exkl. moms)
5 976,25 kr
(inkl. moms)
Enheter
Per unit
1 +
4 781,00 kr
Nästa dag-leverans inte möjlig
Related Products
The Microchip RN-270F is smaller than a business ...
Description:
The Microchip RN-270F is smaller than a business card that easily attaches to RS232 serial ports via a DB9 female connector. It gives any RS232 serial port Bluetooth capabilities and can run without external power. With a built-in AAA battery ...
U1701A & U1701B are ergonomic handheld capacitance LCR ...
Description:
U1701A & U1701B are ergonomic handheld capacitance LCR meters, user friendly with overmold and built and tested to be robust for harsh industrial environments. Efficient capacitor sorting with no need to set and reset standard reference, the meter features up ...
Universal temperature adaptor utilizing a P-N semiconductor junction ...
Description:
Universal temperature adaptor utilizing a P-N semiconductor junction as the sensing element. The adaptor can be plugged into any standard multimeter with input impedence of 1MΩ or greater to provide direct temperature measurement up to 150°C. Powered by PP3 battery ...
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for ...