- RS-artikelnummer:
- 194-2930
- Tillv. art.nr:
- MLX90316KDC-BCG-000-RE
- Tillverkare / varumärke:
- Melexis
8878 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 2)
41,42 kr
(exkl. moms)
51,78 kr
(inkl. moms)
Enheter | Per unit | Per Pack* |
2 - 48 | 41,42 kr | 82,84 kr |
50 - 98 | 35,82 kr | 71,64 kr |
100 - 248 | 34,88 kr | 69,76 kr |
250 - 998 | 33,935 kr | 67,87 kr |
1000 + | 33,105 kr | 66,21 kr |
- RS-artikelnummer:
- 194-2930
- Tillv. art.nr:
- MLX90316KDC-BCG-000-RE
- Tillverkare / varumärke:
- Melexis
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
The MLX90316 is a Triaxis® rotary position sensor IC providing the angular position of a small dipole magnet rotating above the device surface (end-of-shaft magnet). Thanks to an IMC on its surface, the monolithic device senses, in a contactless fashion, the horizontal component of the applied magnetic flux density.
This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (air-gap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360º) and processed by the on-chip DSP to ultimately report the absolute angular position of the magnet either as a ratiometric analogue output or as Pulse-Width Modulation (PWM) signal or as a 14-bit data accessible through a 3-pin SPI (serial interface) channel.
The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range, ...) to match any specific requirement through end-of-line calibration.
This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (air-gap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360º) and processed by the on-chip DSP to ultimately report the absolute angular position of the magnet either as a ratiometric analogue output or as Pulse-Width Modulation (PWM) signal or as a 14-bit data accessible through a 3-pin SPI (serial interface) channel.
The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range, ...) to match any specific requirement through end-of-line calibration.
Specifikationer
Attribute | Value |
---|---|
Sensor Type | Position Sensors |
Mounting Type | Surface Mount |
Maximum Operating Supply Voltage | 5.5 V |
Minimum Operating Supply Voltage | 4.5 V |
Package Type | SOIC |
Pin Count | 8 |
Maximum Operating Temperature | +125 °C |
Minimum Operating Temperature | -40 °C |