ABB Temperature Monitoring Relay With DPDT Contacts, 24 V ac/dc

  • RS-artikelnummer 876-5036
  • Tillv. art.nr 1SVR730712R0200
  • Tillverkare / varumärke ABB
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

CM-MSS Thermistor Motor Protection Relays

Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance

The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:

Main features include:
Dynamic interrupted wire detection
Wide control supply voltage rang 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available

Single Sensor Input Version
Wire Break Detection

Approvals

Some products also have the ATEX approval for the use in hazardous areas.

Specifikationer
Attribute Value
Monitoring Application Temperature
Supply Voltage 24 V ac/dc
Contact Configuration DPDT
Time Delay <100 ms
Temperature Sensitivity Overtemperature, Winding Temperature
Maximum Operating Temperature +60°C
Special Features Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, Manual & Automatic Reset, One Measuring Circuit, Over Heating Protection, Over Load Protection, Remote Reset, Short-Circuit Monitoring of the Sensor Circuit, Test and Reset Button
Height 85.6mm
Mounting Type DIN Rail, Snap-In
Terminal Type Screw
Operating Temperature Range -25 +60 °C
Width 22.5mm
Length 103.7mm
Series CM-MSS
Standards Met ATEX, CB Scheme, CCC, CE, CULus, EAC, EMC, GL, IEC/EN 60255-1, IEC/EN 60947-8, RCM, RoHS
Dimensions 103.7 x 22.5 x 85.6 mm
Number of Poles 1
Current Range Maximum of 3.7 mA
Minimum Operating Temperature -25°C
23 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
781,70 kr
(exkl. moms)
977,12 kr
(inkl. moms)
Enheter
Per unit
1 +
781,70 kr
Related Products
TELE KAPPA series AC and DC voltage monitoring ...
Description:
TELE KAPPA series AC and DC voltage monitoring relay. Multifunction monitoring in a slim easy to use package. The KAPPA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED indicatorScrew terminals2 change over contactMultifunction. ...
TELE GAMMA series single and three phase power ...
Description:
TELE GAMMA series single and three phase power factor monitoring relay. Multifunction monitoring in a slim easy to use package. The GAMMA series have a self-extinguishing plastic body with an IP rating of IP40. Monitoring of inductive and capacitive consumers ...
Detects under-voltage conditionDetects phase lossDetects neutral loss (4-wire ...
Description:
Detects under-voltage conditionDetects phase lossDetects neutral loss (4-wire version)Adjustment for trip level and hysteresisMonitors own supplyTime delay: 200ms (from fault)1 x DPDT relay output 8ALED indication for supply and relay statusDIN rail housingWrite on identification tabDimensions: H78 x W45 x ...
3UG4 relays that monitor current, power factor and ...
Description:
3UG4 relays that monitor current, power factor and active current are ideal for monitoring the load of motors and functionality of electronic loads. These devices detect the effect of wear and faults early on. This means that appropriate actions can ...