STMicroelectronics STM32F405RGT6TR, 32bit ARM Cortex M4 MCU, 168MHz, 1.024 MB Flash, 64-Pin LQFP

  • RS-artikelnummer 792-6013
  • Tillv. STM32F405RGT6TR
  • Tillverkare / varumärke STMicroelectronics
Lagstiftning och ursprungsland

STM32F405/415 Microcontrollers, STMicroelectronics

The STMicroelectronics ARM Cortex STM32 F405/415 ranges of microcontrollers are for embedded applications. The high performance STM32 F4 series 32-bit Flash MCU offers floating point unit (FPU) and digital signal processing (DSP) with industry standard core architecture.
ST’s 32-bit ARM® Cortex™ M4 core operates on the 168 MHz range with integrated peripherals including ADCs, DACs, timers and a crypto/hash processor (STM32F415 only) which provides hardware acceleration for AES 128, 192, 256, Triple DES, and hash (MD5, SHA-1). ST’s ART accelerator and the dynamic power scaling enable low current consumption in run mode.

USB OTG (High Speed support)
Audio: audio PLL and 2 full duplex I²S
Communication interfaces: USARTs, SPI, I²C, CAN, SDIO
Analogue: 12-bit DACs, 12-bit ADCs
Timers: 16-bit and 32-bit (168MHz)
Flash memory: 1MB; SRAM: 92KB
STM32F415 only: integrates a crypto/hash processor
Analogue true random number generator
Operation voltage: 1.7 to 3.6V
Temperature ranges: -40 to +85°C or -40 to +105°C

STM32F4 Series 32-Bit ARM Cortex-M4 Microcontrollers, STMicroelectronics

The ARM Cortex-M4 based STM32 F4 series of high-performance MCUs with DSP and FPU instructions is an extension of the industry-leading STM32 portfolio towards even higher performance. Up to 180 MHz operating frequency.

Up to 2x USB 2.0 OTG FS/HS
SDIO (Secure Digital Input Output)
I²S (Inter-IC Sound) + Audio PLL
16 and 32 Bit Timers
Up to 3x 12-Bit ADC
Low Voltage 1.7 V to 3.6 V

Attribute Value
Family Name STM32F
Package Type LQFP
Mounting Type Surface Mount
Pin Count 64
Device Core ARM Cortex M4
Data Bus Width 32bit
Program Memory Size 1.024 MB
Maximum Frequency 168MHz
RAM Size 192 kB
USB Channels 2
Number of PWM Units 2
ADC Channels 16
Number of SPI Channels 3
Typical Operating Supply Voltage 3.6 V
Number of Timers 2, 12
Number of ADC Units 3
Number of USART Channels 4
ADCs 3 (16 x 12 bit)
Width 10mm
PWM Resolution 16bit
Instruction Set Architecture DSP
Minimum Operating Temperature -40 °C
Timer Resolution 16 bit, 32 bit
ADC Resolution 12bit
Number of CAN Channels 2
Timers 2 x 32 bit, 12 x 16 bit
Number of I2C Channels 3
Height 1.45mm
Maximum Operating Temperature +85 °C
Number of UART Channels 2
Pulse Width Modulation 2 (16 bit)
Program Memory Type Flash
Length 10mm
Dimensions 10 x 10 x 1.45mm
586 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
93,58 kr
(exkl. moms)
116,98 kr
(inkl. moms)
Per unit
1 - 9
93,58 kr
10 - 19
80,34 kr
20 +
77,14 kr
Related Products
120Mhz MIPS32 microAptiv MCU CoreFloating Point Unit for ...
120Mhz MIPS32 microAptiv MCU CoreFloating Point Unit for single and double precision mathMicroMIPS Mode for 40% smaller code sizeDSP-Enhanced Core:Four 64-bit AccumulatorsSingle Cycle MAC supporting saturating and fractional math1MB Dual Panel Flash with Live Update support4KB EEPROMHigh Performance Analog Front ...
120Mhz MIPS32 microAptiv MCU Core. Floating Point Unit ...
120Mhz MIPS32 microAptiv MCU Core. Floating Point Unit for single and double precision math. MicroMIPS Mode for 40% smaller code size. DSP-Enhanced Core: Four 64-bit Accumulators. Single Cycle MAC supporting saturating and fractional math. DSP-Enhanced Core: Four 64-bit AccumulatorsSingle Cycle ...
The STM32F7xx microcontrollers are based on the high-performance ...
The STM32F7xx microcontrollers are based on the high-performance ARM Cortex-M7 32-bit RISC core. AXI and multi-AHB bus matrixes for interconnecting core, peripherals and memoriesDouble-Precision Floating-Point maths unit on some variantsUp to 16KB +16KB of I-cache and D-cacheUp to 2MB of ...
The DAVETM 3 software is a free tool chain that helps develop the software with the XMC4000 Series to utilise the hardware features. The DAVE tool incorporates all the features from existing DAVE tools and includes the IDE, Compiler, Debugger ...