RS PRO Rope Pull Kit, For Use With All Rope Pull Switches

  • RS-artikelnummer 239-6814
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

RS Rope Kits for All Rope Pull Switches

Supplied with all fittings and fixtures required to install any rope pull switch, including hazardous area versions
Stainless steel grade 316 and the cable is multi-strand galvanised steel covered with PVC
Two thimbles, collar clamps and "D" shackles are provided for securing each end of the grab wire to the safety switch
Stainless steel tensioner provided for switches that do not have this feature built in
Sufficient M6 eyebolts with locking nuts are provided to support the wire at approximately 2 to 3m intervals
First and last supports should be placed no more than 300mm from the end of the switch to ensure that the pull on the switch is linear
Vital for correct operation to ensure that the wire is free running when pulled
Rope may be cut to any suitable required length

Specifikationer
Attribute Value
Accessory Type Rope Pull Kit
For Use With All Rope Pull Switches
Size 50m
Grab Wire Clamp Type Collar
17 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 687,04 kr
(exkl. moms)
2 108,80 kr
(inkl. moms)
Enheter
Per unit
1 +
1 687,04 kr
Related Products
The Actuonix extension cable for S-series actuators is ...
Description:
The Actuonix extension cable for S-series actuators is a 2 conductor cable and has one male and one female end. 1m long cableCompatible with L12 -S, L16 -S, P16-S and T16-S actuators.
Ideal for integrating into existing control gear. Supplied ...
Description:
Ideal for integrating into existing control gear. Supplied with a fused terminal block and pre-cut connection wires.,The modules can be tuned specifically to the lamp, giving better performance for the cell capacity.
Even under extreme conditions, such as major temperature ...
Description:
Even under extreme conditions, such as major temperature fluctuations, the SRM rope pull switch continues to work reliably. Rope pull switch manufactured in accordance with DIN EN 60947-5-5 and DIN EN ISO 13850Protection class IP67Stable and durable metal housing (aluminium ...
The Telemecanique Sensors XY2-CH-series emergency stop rope pull ...
Description:
The Telemecanique Sensors XY2-CH-series emergency stop rope pull switch has a 1NO/2NC contact configuration. It has Zamak housing and has a straight mount orientation. The maximum AC and DC voltage is 240VAC and 250VDC respectively and the current rating of ...