ABB CM-ENS Series Liquid Level Relay - DIN Rail Mount, 110 130 V ac, 220 240 V ac 1 Voltage Input

  • RS-artikelnummer 135-6330
  • Tillv. art.nr 1SVR740850R2200
  • Tillverkare / varumärke ABB
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): DE
Produktdetaljer

CM-ENS Liquid Level Relays

A series of liquid level control relays from ABB for conductive liquids. The CM-ENS range gives a choice of 3 variants each with a compact, space saving housing with the highest fire protection and environmentally friendly materials. Installation is quick and easy using screw or easy-connect terminals and tool free DIN Rail mounting.

Features and Benefits (CM-ENS.1 / CM-ENS.2 / CM-ENS.3)

• 3 LED operational state indication • Choices of Easy connect push in terminals or screw terminals
• DIN Rail mountable - no tooling required
• Easy adjustment using front panel
• Cascadable
• Adjustable response sensitivity
• 1 C/O SPDT output contact
• Compact 22.5 mm width

Additional Features CM-ENS.2

• Control of two levels (MIN/MAX) • Front panel adjustment of fill and drain function

Additional Features CM-ENS.31

• Control of two levels (MIN/MAX) • Front panel adjustment of fill and drain function
• 2 C/O SPDT Contacts
• Selectable ON / OFF delay

Applications

• Dry running protection • Overflow protection
• Liquid level control

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels

Specifikationer
Attribute Value
Number of Inputs 1
Mounting Style DIN Rail Mount
Supply Voltage 110 130 V ac, 220 240 V ac
Overall Length 113.4mm
Overall Width 22.5mm
Overall Depth 113.4mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Termination Type Push In
Output Type SPDT Relay
Number of Outputs 1
Input Type Voltage
IP Rating IP20 (Terminal), IP50 (Housing)
Sensitivity 0.1 1000 kΩ
Isolation Voltage 300 (Supply Circuit)V
Series CM-ENS
Standards Met CAN/CSA C22.2 No.14, IEC/EN 60255-27, IEC/EN 60947-5-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL 508
Current Rating 8.5 (220 240 V ac) mA, 20 (110 130 V ac) mA
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 107,41 kr
(exkl. moms)
1 384,26 kr
(inkl. moms)
Enheter
Per unit
1 +
1 107,41 kr
Related Products
Flow switch series from Cynergy3. These flow switches ...
Description:
Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. ...
Maximum Liquid Level Relays may be used to ...
Description:
Maximum Liquid Level Relays may be used to monitor when liquid media reaches or falls below the desired level in a tank/vessel. The units are often employed for use within pumped control systems, overflow monitoring applications and dry running protection. ...
Maximum/Minimum Liquid Level Relays are suitable for a ...
Description:
Maximum/Minimum Liquid Level Relays are suitable for a number of applications including fill and drain monitoring of tanks. Single-pole electrodes sense a change in resistance, energising the circuit if the liquid exceeds the maximum level, and de-energising if the liquid ...
Often used to monitor liquid levels in pump ...
Description:
Often used to monitor liquid levels in pump control systems and dry running protection for submersible pumps, Fill/Empty Level Liquid Relays measuring principle is based on a change in resistance sensed by single-pole electrodes. Measuring, output and supply circuits are ...