LED Reflector Bulb, BA9s, Red, Single Chip, 9 mm Lamp, 4.9mm dia., 12 V dc

  • RS-artikelnummer 238-8071
  • Tillv. art.nr 215-501-21-38
  • Tillverkare / varumärke Marl
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

T3 BA9s MBC Ultra-Bright LEDs

Integral resistor allows direct connection to either 12, 24, 28, 60 or 110Vdc supplies

Note

These LED’s should only be used with suitably rated lampholders. Live parts should be inaccessible when in use. 110Vac LED’s cannot be used with a dropper resistor on 230Vac

//media.rs-online.com/t_line/L238807-01.gif

MARL, Single Chip LED’s

A series of ultra-bright, sunlight-readable, water-clear LED’s suitable for a variety of applications. Specially manufactured lens provides a very wide viewing angle and high intensity output. Intensities are stated at the following viewing angles for the LED’s: Red 30°, Green 15°, Yellow 16°, Blue 15°, White 45°.

Specifikationer
Attribute Value
Voltage Rating 12 V dc
Light Output Colour Red
Intensity 11000 mcd
Lamp Base BA9s
Lamp Size 9 mm
Chip Type Single Chip
Diameter 4.9mm
Length 26 mm
Viewing Angle 120°
Peak Wavelength 643 nm
Current Rating 20 mA
Life Hours 100000h
5 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
91,30 kr
(exkl. moms)
114,12 kr
(inkl. moms)
Enheter
Per unit
1 - 14
91,30 kr
15 - 49
74,63 kr
50 - 99
63,44 kr
100 - 249
52,92 kr
250 +
47,05 kr
Related Products
Multi-chip LEDs are semi-conducting alternatives to incandescent filament ...
Description:
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps. ...
Brought to you under the trusted RS Brand, ...
Description:
Brought to you under the trusted RS Brand, these BA9s indicator lamps have a single chip LED with a built in reflector, optimising brightness and intensity while maintaining low energy consumption. The lamps are fitted with a convenient bayonet connector ...
Multi-chip LEDs are semi-conducting alternatives to incandescent filament ...
Description:
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps. ...
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...