Molex CoB LED Holder for LEDiL Angela/Angelina Reflector, Lumileds LUXEON 1202, Lumileds LUXEON 1203 50 (Dia.) x 8.7mm

  • RS-artikelnummer 818-3257
  • Tillv. art.nr 180580-0005
  • Tillverkare / varumärke Molex
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CN
Produktdetaljer

Molex Nichia LED Array Holders

Molex’s LED Array Holders are ideal for OEM light-fixture manufacturers, they simplify the Nichia CoB-L LED installation process and reduce installation time through the use of compression contacts that eliminate the need for hand or SMT soldering and expensive SMT equipment. Using unmatched interconnect technology, Molex’s LED array holders provide a solderless solution for mounting Nichia CoB-L LED arrays into OEM designs using wire trap terminals for the power cables to allow serial or parallel sequences. The holders allow Nichia CoB-L LED arrays to be quickly installed into fixtures, enable field replacements and facilitate upgrades to current applications. Molex LED array holders are ideal for applications including: Architectural lighting, Area lighting and Down lighting.

Low-profile 4.1 mm design
Compression contacts to power array
Optical Clearance Area (OCA) sufficient for electrical and thermal connections without interfering with light output or beam angle
Wire-trap terminals to attach power source, suitable for wire size 18AWG or 20AWG solid recommended or if stranded wire is used then pre-tinned is recommended
Releasable wire trap for rework or replacement
Array secured into holder with Integrated Pre-Hold Tab
Screw-mount attachment of LED array and holder to heat sink using M3 or 4-40 UNC screws
Provides voltage isolation between LED and heat sink
Stable connection in high-ambient temperature
Ideal for Downlighting or Area lighting
Allows for field serviceability

782-3677 For Nichia, Osram Solerig and Cree 22 x 22 mm Rectangular COBs, double-ended wire trap.
818-3254 For Nichia Circular Ø22 mm COBs, single-ended wire trap.
818-3257 For Nichia Circular Ø22 mm COBs, single-ended wire trap also mounts LEDiL Angela/Angelina Reflectors.

Specifikationer
Attribute Value
For Use With LEDiL Angela/Angelina Reflector, Lumileds LUXEON 1202, Lumileds LUXEON 1203
Dimensions 50 (Dia.) x 8.7mm
Width 8.7mm
84 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
25,01 kr
(exkl. moms)
31,26 kr
(inkl. moms)
Enheter
Per unit
1 - 19
25,01 kr
20 - 74
22,82 kr
75 - 299
20,84 kr
300 - 599
20,34 kr
600 +
19,45 kr
Related Products
A range of aluminium channels for mounting flexible ...
Description:
A range of aluminium channels for mounting flexible LED strips. Supplied in 1 metre lengths together these channels can be cut to length or linked together to make longer runs. Perfect for under cabinet, shelve, cove or skirting lighting.6 models ...
A range of LED Array Holders with Snap-in ...
Description:
A range of LED Array Holders with Snap-in retention and Poke-in wire connection for rapid solderless assembly:793-2844 Z50 Holder for Citizen CLL030/032 low profile.793- 2853 Z50 Holder for Citizen CLL030/032 with optic attachment.
A range of LED Array Holders for the ...
Description:
A range of LED Array Holders for the Samsung LC026B and LC040B Series with Snap-in retention and Poke-in wire connection for rapid solderless assembly:793-2850 Holder for LC026B/LC040B low profile.793-2856 Holder for LC026B/LC040B with optic attachment.
The Z50 Reflector Optics Retaining Clip Model 1 ...
Description:
The Z50 Reflector Optics Retaining Clip Model 1 for use with LED Array Modules from Citizen, Philips and Samsung.