GLS GLS Lamp Holder Screw - 1174WHI

  • RS-artikelnummer 787-1244
  • Tillv. art.nr 1174WHI
  • Tillverkare / varumärke MK Electric
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CN
Produktdetaljer

White Straight Batten Holder

Heat Resistant tails, live, neutral, loop-in and earth terminals

All MK lampholders are heat resistant to category T2 of BS EN 61184 and are therefore capable of operation with lamp cap temperatures up to 210°C.

1174 WHI also incorporates heat resistant wires connecting the terminals in the base to the lampholder. It has terminals mounted in the base and knockouts which accommodate 3 x 2.5 mm2 cables and allow for off centre cable entries.

Approvals

BS EN 61184: 1997 T2 Rated

MK Ceiling Accessories

Specifikationer
Attribute Value
Supported Lamp Type GLS
Base B22, BC
Lamp Size GLS
Mount Type Ceiling
Fixing Method Screw
Wattage 150 W
Length 86 mm
Width 75 mm
Wiring Type Ceiling Rose
26 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
98,20 kr
(exkl. moms)
122,75 kr
(inkl. moms)
Enheter
Per unit
1 +
98,20 kr
Related Products
This metal halide lampholder is designed for use ...
Description:
This metal halide lampholder is designed for use with a R7s fittingRated at 150W, 1000V, 5KV pulse-rated, the holder will accept a starting voltage up to 4·5kV.
Lamp holder for low voltage halogen lamps, rated ...
Description:
Lamp holder for low voltage halogen lamps, rated at 10A, 50V. The lamp holder should be fixed prior to use. Rear cable entry connectionWires: Cu, tin-plated, 0.75 square mm, with ferruleInsulation: silicone (max 180°C)Free cable length: 140 mmScrew fixingCeramic / ...
Black, thermohardening resin sockets for E14 and E27 ...
Description:
Black, thermohardening resin sockets for E14 and E27 bulbs, 60 W maximum, supplied as 3 pre-screwed parts.Copper alloy ferrule; cap with threaded M10 metal connector with stopper and anti-rotation locking screw.Half-threaded sleeve with ferrule in insulating material.The corresponding rings must ...
A moulded plastic bottom-wiring surface-mounting BC (B22) lampholder. ...
Description:
A moulded plastic bottom-wiring surface-mounting BC (B22) lampholder. A suitable protection shroud is also available which snaps onto the front of the lampholder.