GF708AMA-AE Sensitec, Inclinometer Sensor, 8-Pin LGA6S

  • RS-artikelnummer 792-4212
  • Tillv. GF708AMA-AE
  • Tillverkare / varumärke Sensitec
Lagstiftning och ursprungsland
COO (Country of Origin): DE

GF708 MagnetoResistiver Magnetic Field Sensors

The GF708 magnetic field sensors from Sensitec are based on the GMR (Giant MagnetoResistive) effect. They feature a Wheatstone bridge with on-chip flux concentrators, providing an improvement in sensitivity.
The GF708 sensor can be used for highly sensitive applications with a sensitivity of 130 mV/V/mT. Alternatively it can be used as an indexing sensor.

Features and Benefits
Large air gap
Large permissible air gap tolerances
High switching accuracy
Easy identification of field direction
Simple integration
Allows use of small magnets
Allows detection of smaller particles or material defects (NDT)
Large permissible distance to target
High resolution for magnetic imaging

Product Applications
Suitable applications for the GF708 sensors include switching applications and magnetic field measurement.

Magnetoresistive Sensors, Sensitec

Attribute Value
Mounting Type Surface Mount
Package Type LGA6S
Pin Count 8
Dimensions 3 x 2.6 x 1.4mm
Length 3mm
Width 2.6mm
Height 1.4mm
Maximum Operating Supply Voltage 9 V
Minimum Operating Supply Voltage -9 V
Minimum Frequency Response 1MHz
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Tillfälligt slut i lager – restorder för leverans 2020-08-26
Pris (ex. moms) Each
40,74 kr
(exkl. moms)
50,92 kr
(inkl. moms)
Per unit
1 - 24
40,74 kr
25 - 99
39,71 kr
100 - 499
38,67 kr
500 - 1249
37,64 kr
1250 +
36,71 kr
Related Products
The omnipolar Hall ICs are magnetic switches that ...
The omnipolar Hall ICs are magnetic switches that can operate both S-and N-pole, upon which the output goes from Hi to Low. In addition to regular single-output Hall ICs, We offer a lineup of dual-output units with a reverse output ...
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
The AS5047D is a high-resolution rotary position sensor ...
The AS5047D is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. The integrated circuit is a 14-bit on-axis magnetic rotary position sensor with 11-bit decimal and binary incremental pulse count. DAEC Dynamic Angle ...
The AS5162 is a contactless Hall-based magnetic position ...
The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection. 360º contactless high-resolution angular ...