A1230LLTR-T Allegro Microsystems, Bipolar Hall Effect Sensor, 8-Pin SOIC
- RS-artikelnummer:
- 753-1996
- Tillv. art.nr:
- A1230LLTR-T
- Tillverkare / varumärke:
- Allegro Microsystems
Denna produkt har utgått
- RS-artikelnummer:
- 753-1996
- Tillv. art.nr:
- A1230LLTR-T
- Tillverkare / varumärke:
- Allegro Microsystems
Lagstiftning och ursprungsland
- COO (Country of Origin):
- GB
Produktdetaljer
A1230 Dual Channel Quadrature Hall Effect Bipolar Switch, Allegro Microsystems
The Allegro Microsystems A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements. Each element provides a separate digital output for speed and direction signal processing.
The Hall elements are aligned with an accuracy greater than 1 μm. This accuracy makes it ideal for use in ring magnet based, speed and direction systems located in harsh automotive and industrial environments.
The A1230 contains two independent Hall-effect bipolar switches located 1 mm apart. The digital outputs are out of phase so the outputs are in quadrature when interfaced with the proper ring magnet design. Low-drift amplifiers guarantee symmetry between the switches.
The Allegro high-frequency chopper-stabilisation cancels offsets in each channel providing stable operation over the full specified temperature and voltage ranges.
The A1230 is available in a plastic 8-pin SOIC surface mount package and a plastic 4-pin SIP.
The Hall elements are aligned with an accuracy greater than 1 μm. This accuracy makes it ideal for use in ring magnet based, speed and direction systems located in harsh automotive and industrial environments.
The A1230 contains two independent Hall-effect bipolar switches located 1 mm apart. The digital outputs are out of phase so the outputs are in quadrature when interfaced with the proper ring magnet design. Low-drift amplifiers guarantee symmetry between the switches.
The Allegro high-frequency chopper-stabilisation cancels offsets in each channel providing stable operation over the full specified temperature and voltage ranges.
The A1230 is available in a plastic 8-pin SOIC surface mount package and a plastic 4-pin SIP.
AEC-Q100 automotive qualified
Two matched Hall-effect switches on a single substrate
1 mm Hall element spacing
Superior temperature stability and industry-leading jitter performance through use of advanced chopper stabilisation topology
Integrated LDO regulator provides 3.3 V operation
Integrated ESD protection from outputs and VCC to ground
High-sensitivity switchpoints
Robust structure for EMC protection
Reverse-battery protection on supply and both output pins
Two matched Hall-effect switches on a single substrate
1 mm Hall element spacing
Superior temperature stability and industry-leading jitter performance through use of advanced chopper stabilisation topology
Integrated LDO regulator provides 3.3 V operation
Integrated ESD protection from outputs and VCC to ground
High-sensitivity switchpoints
Robust structure for EMC protection
Reverse-battery protection on supply and both output pins
Hall Effect Sensors, Allegro MicroSystems
Specifikationer
Attribute | Value |
|---|---|
| Mounting Type | Surface Mount |
| Magnetic Type | Bipolar |
| Maximum Operating Supply Voltage | 18 V |
| Minimum Operating Supply Voltage | 3.3 V |
| Package Type | SOIC |
| Pin Count | 8 |
| Maximum Operating Temperature | +150 °C |
| Minimum Operating Temperature | -40 °C |
- RS-artikelnummer:
- 753-1996
- Tillv. art.nr:
- A1230LLTR-T
- Tillverkare / varumärke:
- Allegro Microsystems