RS PRO L Gearbox, 1:1 Gear Ratio, 500rpm Maximum Speed

  • RS-artikelnummer 420-603
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Bevel Gearbox - 1:1 Ratio

The unit has steel bevel gears and shafts running in ball races and sintered bronze bearings, one ball race and one sintered bronze bearing per shaft. The ball races also act as a thrust race protecting the bevel gears from axial pressures of varying loads. The moulded housings are 30% glass reinforced nylon for strength and have four drilled mounting holes. Output shafts are Ø5mm with key flats. Length from heel of body to end of shafts 57.5mm approx.

Lubricated for life
Designed for rugged service
Weight: 42g
Backlash: 1° approx.
Gears: Mild steel to BS970 part 3, 1991, 230MO7

MFA Como Geared Motors

A selection guide for MFA Como Geared Motors available:

Multi-ratio spur geared motors:

Suitable for low torque R&D and education applications
Useful in seeking suitable speeds for applications by selecting the appropriate ratio and/or voltage

Metal single ratio spur geared motors mounted on steel brackets:

Suitable for industrial/modelling applications
Economical and easily accessible

Metal single ratio epicyclic geared motors:

Suitable for industrial/modelling applications
Higher efficiency than spur (can be above 90%)
Smaller size and weight for the same or similar rating
Can be equally efficient in either direction
Co-axial configuration of input and output shafts allows inline installation with motor and machine

Specifikationer
Attribute Value
Gear Ratio 1:1
Gearbox Type L
Shaft Diameter 5mm
Overall Length 57.3mm
Overall Width 30mm
Overall Depth 57.3mm
Maximum Speed 500rpm
8 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
312,47 kr
(exkl. moms)
390,59 kr
(inkl. moms)
Enheter
Per unit
1 +
312,47 kr
Related Products
High quality ovoid reduction gearboxes of similar construction ...
Description:
High quality ovoid reduction gearboxes of similar construction to the synchronous gearboxes. A double-ended Ø4mm output shaft is fitted in order to accommodate a servo potentiometer mounting kit and conductive plastic potentiometers, when used in positional servo applications.,Alternatively, the gearbox ...
These gearheads are designed to fit Panasonic 3 ...
Description:
These gearheads are designed to fit Panasonic 3 Series 60W (and 90W) AC single and three phase motors. The flange offers improved mounting that is often required for the higher powered motors. Grease-lubricated gearboxes10000hr lifeQuiet operationClass B motor insulation.
Panasonic 3 Series Motors, with identical mounting dimensions ...
Description:
Panasonic 3 Series Motors, with identical mounting dimensions as the G Series, replace and offer the following benefits over G Series Motors:. Fits between a Panasonic 3 Series 60W or 90W motor and gearhead of the same frame sizeProvides a ...
Low to medium power dc. motors fitted with ...
Description:
Low to medium power dc. motors fitted with a square mounting flange, centring bush and drive pinion. This allows simple and quick attachment to a 65mm square gearbox. All motors have sintered bronze bearings lubricated for life32mm diameter motors have ...