S/steel 2 position float switch,25/175mm

  • RS-artikelnummer 492-8946
  • Tillv. art.nr SSF67A25B175
  • Tillverkare / varumärke Cynergy3
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer
//media.rs-online.com/t_line/L492890-01.gif

Cynergy3 Float Switch

The Cynergy3 SSF67 series float switch is a vertical mount type and has direct load output. This float switch has a stainless steel body. It has a maximum operating pressure of 10bar. The switch has an upper level is 25mm and the lower level is 175mm. It is designed to give the user a long reach float switch. It comes with several switching options to cater for a wide variety of system requirements. The single float version gives high (make on rising) and low (make on fall) level indications for alarms and controls systems. The dual float versions give either make on the rise for both high and low levels (used for tank emptying control) or make on fall for both high and low levels (used for tank filling control).
Note:
All ratings in technical specifications table are for resistive loads only.

Warning:
The cable entry point must not under any circumstances be submerged
The horizontal switches should be fitted through the wall of a tank so that the cable is on the outside
The vertical type mounting thread and cable entry must be above the highest level of the liquid
.

Features and Benefits

Minimum fluid SG is 0.8
Switch differential (each level) nominal is 1mm
Internal mounting, M16 x 2 thread
Operating temperature ranges between -20°C and 135°C
Total length is 202mm
Maximum switching power is 25VA

Applications

Suited for use with aggressive liquids and hygienic applications
Petrochemical
Storage
Process control applications

Certifications

ISO 9001

Specifikationer
Attribute Value
Device Type Float
Mounting Type Vertical
Switch Output Direct Load
Body Material Stainless Steel
Minimum Operating Temperature -20°C
Maximum Operating Temperature +135°C
Maximum Current 600 mA
Maximum Pressure 10bar
Gasket Material Nitrile
Series SSF67
19 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 816,23 kr
(exkl. moms)
2 270,29 kr
(inkl. moms)
Enheter
Per unit
1 +
1 816,23 kr
Related Products
The Gems Sensors LS-7 series are ideal for ...
Description:
The Gems Sensors LS-7 series are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers a broad compatibility in water, oils and chemicals, making them suitable for various applications. All models are highly reliable and ...
A stainless steel vertical float switch fitted with ...
Description:
A stainless steel vertical float switch fitted with an acrylic guard to help prevent against accidental operation caused by turbulent fluids. The float switch can be bought with an extra test facility allowing the float to be manually lifted to ...
The RS PRO 312-7164 is an internal fitting ...
Description:
The RS PRO 312-7164 is an internal fitting float switch. This compact switch measures just 64mm high and 28mm in diameter. The 312-7164 is made from 316 grade stainless steel which means it offers great resistance against corrosion. How is ...
Carlo Gavazzi FS series of level sensors are ...
Description:
Carlo Gavazzi FS series of level sensors are economical electromechanical float switches for liquid level sensing. Selectable normally open or normally closed outputs, along with various mounting configurations and housing materials, allow the FS sensors to fit a wide variety ...