External nylon H floatswitch w/Si gasket

  • RS-artikelnummer 317-932
  • Tillv. art.nr RSF73Y050QM
  • Tillverkare / varumärke Cynergy3
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

Cynergy3 Horizontal Float Switches

Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon
• Polypropylene
• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C
• N/O or N/C Switch output
• Switch action may be reversed by rotating the switch through 180º
• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
• Flying Lead
• M12 plug connection
• Internal & external fitting inside a tank
UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

RSF70 Float Swicth Series

The RSF70 Float Switch series is designed for external fitting. To ensure the quality, high compression seal will take care of getting the job done. These switches don’t require access to the inside of the tank and are best used for the applications that are tight and when the time is playing an important role.

The floatswitch RSF73Y050QM is fitted in a 23 mm dia. hole in the tank from the outside and secured by a compression seal with a backnut.

Specifikationer
Attribute Value
Device Type Float
Mounting Type Horizontal External
Switch Output Direct Load
Body Material Nylon
Cable Length 500mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Maximum Current 600 mA
Gasket Material Silicone
Series RSF70
1741 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
150,56 kr
(exkl. moms)
188,20 kr
(inkl. moms)
Enheter
Per unit
1 - 4
150,56 kr
5 - 9
145,96 kr
10 +
141,27 kr
Related Products
Cynergy3 RSF50 float switches are compact devices suitable ...
Description:
Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.There is a range of different material options available within the ...
The Gems Sensors LS-7 series are ideal for ...
Description:
The Gems Sensors LS-7 series are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers a broad compatibility in water, oils and chemicals, making them suitable for various applications. All models are highly reliable and ...
RSF50 series are compact vertically mounted devices with ...
Description:
RSF50 series are compact vertically mounted devices with a single switchpoint. Mounting is either from the top or bottom of a tank from the inside, so requires access to the inside of the tank. Typical applications include vending machines, printing ...
The RS PRO float switch requires access to ...
Description:
The RS PRO float switch requires access to the inside area of the tank. The switch action may be reversed by rotating the device through 180°. Cable sets with M12 plugs are also available. • Body is Made of nylon• ...