- RS-artikelnummer:
- 189-5756
- Tillverkare / varumärke:
- RS PRO
690 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 3)
43,577 kr
(exkl. moms)
54,471 kr
(inkl. moms)
Enheter | Per unit | Per Pack* |
3 + | 43,577 kr | 130,731 kr |
- RS-artikelnummer:
- 189-5756
- Tillverkare / varumärke:
- RS PRO
Lagstiftning och ursprungsland
RoHS-status: Inte relevant
- COO (Country of Origin):
- CN
Produktdetaljer
RS PRO Aluminium Oxide Flap Wheel, 30 mm Diameter, P40, P80, P120 Grit
Get the finish you need on your metalwork with this set of RS PRO flap wheels. This pack of three comes with P40, P80 and P120 grit sizes for course and fine sanding of surfaces. These abrasive flaps are made from a hard aluminium oxide, making them suitable for deburring steel and cleaning rusty iron.
These are designed for use with your electric or air drill at speeds up to 16500 rpm (revolutions per minute) for quick work over large areas. They come with standard-sized 6 mm spindles for mounting onto your power tool's chuck. Each wheel is clearly labelled so you can see at a glance what grit size you're using.
These flap wheels are flexible enough to prevent uneven sanding and ideally shaped for reaching inside tubing and pipework. Welders, fabricators and auto technicians use these accessories as an essential part of their finishing armoury.
These are designed for use with your electric or air drill at speeds up to 16500 rpm (revolutions per minute) for quick work over large areas. They come with standard-sized 6 mm spindles for mounting onto your power tool's chuck. Each wheel is clearly labelled so you can see at a glance what grit size you're using.
These flap wheels are flexible enough to prevent uneven sanding and ideally shaped for reaching inside tubing and pipework. Welders, fabricators and auto technicians use these accessories as an essential part of their finishing armoury.
Features and Benefits
• Aluminium oxide abrasive material
• Diameter of 30 mm
• P40, P80 and P120 grit sizes
• Shank diameter of 6 mm
• Flap wheel type
• Diameter of 30 mm
• P40, P80 and P120 grit sizes
• Shank diameter of 6 mm
• Flap wheel type
Specifikationer
Attribute | Value |
---|---|
Abrasive Material | Aluminium Oxide |
Grit Size | P40, P80, P120 |
Diameter | 30mm |
Wheel Type | Flap Wheel |
- RS-artikelnummer:
- 189-5756
- Tillverkare / varumärke:
- RS PRO