RS PRO ESD Kit

  • RS-artikelnummer 123-5614
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
Und.t.
COO (Country of Origin): GB
Produktdetaljer

RS Pro ESD Benchtop Kits

RS Pro ESD development board ESD benchtop kit provides you with an effective ESD control workstation. The development kit creates a temporary ESD protected area (EPA). The EPA is a working area where electrostatic discharge sensitive devices (ESDS) can be unpacked, handled and packed. Using the EPA working area ensures minimum risk of damage by static electricity. The kit is available in two versions, UK and European. The benchtop kit includes a mat, straight cord, coiled cord, adjustable wrist band. An ESD awareness guide and either a UK or European plug is also included with the benchtop kit.

FEATURES and BENEFITS:

ESD Development board benchtop kit
Provides ESD control workstation
Temporary ESD protected area
Reduces the risk of damage by static electricity
Two versions available, UK kit and European Kit
Kit includes, Pro-Mat, Black straight cord with socket, Blue coiled cord with socket, Blue adjustable elasticated wrist band, ESD awareness guide, UK plug or a European plug

PRO-MAT:

Used as a work surface or on shelving
Chemical resistant
Impregnated material
Durable
100% recycled material
100% recyclable
Low charging antistatic dissipative surface
Includes 2 x 10 mm male stud grounding snaps
Size 298 mm x 450 mm x 2 mm
Meets EN 61340-5-1

COILED and GROUND CORD:

GROUND CORD
Used to connect mats to an Earth bonding point (EPB) plugs
Cord diameter 2.5 mm
PVE insulation with 7 ends duplex tinsel copper conductor
1 megohms resistor in socket end
Length 0.7 m
2 x 100 sockets
COLIED CORD:
Connects to the wristband to earth bonding point (EBP) plugs
2.4 mm diameter
Polyurethane insulation with tinsel copper conductor
10 megohms resistor in socket end
Length 2.4 m
2 x 10 mm sockets

WRISTBAND:

Versatile
Metal or plastic backing
Adjustable elasticated to fit wrist circumference of 130 mm to 180 mm
10 mm stud connector
Metal assists contact to dry skin
Use plastic cover if any metal on skin issues
Band inside surface 80 threads Acrylonitrile-copper sulphide dye composition fibre for inner conductive material
Band outside surface Polyester fibre
Band resistance 80 to 90 Ohm/inch
Plastic plate Polycarbonate
Latch Polycarbonate
Metal base is stainless steel

PLUGS:
UK – Stock number 123-5614 – casing size 51 x 49 x 31 mm
Europe – Stock number 123-5615 – casing size 63 x 49 x 49 mm
Colour is yellow
Weight 36 g
Connector to earth pin resistance 0.8 megohms to 1.2 megohms
Connector to connector resistance approximately 2 megohms

Standards

EN 61350-5-1

RS Pro ESD Kits

Specifikationer
Attribute Value
Cord Length 2.4m
Mat Length 298mm
Mat Width 450mm
Complies with EN 61340-5-1 Yes
Mat Resistance <105Ω
Mat Thickness 2mm
Tillfälligt slut i lager – restorder för leverans 2020-11-17
Pris (ex. moms) Pr. Kit
515,66 kr
(exkl. moms)
644,58 kr
(inkl. moms)
Sats(er)
1 +
515,66 kr
Related Products
This kit is a complete solution for a ...
Description:
This kit is a complete solution for a workstation.It includes a table pad, a floor mat, an adjustable bracelet and cord, as well as two grounding cords.Double-weft pad resists solder and features a 10 mm male snap,and a dual terminal ...
Kit contents: high quality static dissipative mat (1 ...
Description:
Kit contents: high quality static dissipative mat (1 x 10mm male snap); adjustable wrist strap set; 4m EBP ground cord; black wide jaw crocodile clip; stacking banana jack/10mm stud adaptorMat includes 1 sewn-in pocket 89mm x 127mmSurface resistance 10E6-10E8 ohms ...
ESD safe conductive constructionIncreases storage capacity and frees ...
Description:
ESD safe conductive constructionIncreases storage capacity and frees up valuable work surfaceUtilises stackable corner posts to allow stacking of up to 75mm and 150mm high PCB'sKit consists of 2 PCB holders and 4 postsPCB holders are the same specification as ...
The Analogue Surface Resistance Test Kit is a ...
Description:
The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to ...