1601N Safety Edge Profile, Protected Area 2m, LHT Wire Lead

Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB

Safedge Profiles

The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated.
It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds.
The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions.
It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths.
A range of accessories for end termination and 90° active corner joints are also available.

2 different profile designs
Conductive rubber technology
Available in 1m, 1.5m or 2m lengths
Aluminium mounting rail
The system has a bend radius of 200mm
Rubber boot optional
Active corners
IP65 protection


These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive.


Safety Edge

Attribute Value
Protected Area 2m
Range Safedge
Series 440-F
Length 43mm
Width 28.5mm
Profile 1601N
Terminal Type LHT Wire Lead
Material EPDM, NBR/CR
Tillfälligt slut i lager – restorder för leverans 2020-06-08
Pris (ex. moms) Each
3 076,15 kr
(exkl. moms)
3 845,19 kr
(inkl. moms)
Per unit
1 +
3 076,15 kr
Related Products
STAR-GAP snap ferrite sleeves feature a pre-fixing and ...
STAR-GAP snap ferrite sleeves feature a pre-fixing and cable protection system allowing for quick and easy assembly. A low reduction of impedance is ensured by the low magnetic saturation of the material in high DC current applications.These ferrite sleeves are ...
The Kobra Hygiecam series from IDEM are tongue ...
The Kobra Hygiecam series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key ...
The ABB Jokab USR22 is a universal safety ...
The ABB Jokab USR22 is a universal safety relay timer with 2NO+2 delayable NO contacts and a 24VDC power supply. This is used with safety devices with contacts 1 and 2 channels, safety devices with OSSD outputs and safety edges/bumpers. ...
Simple and effective safety monitoring has never been ...
Simple and effective safety monitoring has never been more crucial in today's highly automated world. Prevention is key to site safety, that's why Schneider Electric offers a Safety Relay in the form of the 'Preventa XPSAK' module that is second ...