Schneider Electric 0.25 kW Automatic 3P DOL Starter, 415 V ac, 3 Phase, IP65

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CZ
Produktdetaljer

Direct motor control starter

The starter features a TeSys LC1Kxx contactor, 1 TeSys LR2k thermal relay (depending on model), 1 green "On" button, 1 red "Stop / Reset" button and an indicator light.

Note

Please refer to datasheet to confirm which model is supplied with or without relay.

Standards

IEC 947-4-1, IEC 439-1, VDE 0660-102 and EN 60947

Plastic/Metal Combination Housings

These motor starters are available in a selection of formats. All have removable steel base plates for rigidity when mounting to an uneven surface and ease of earthing and wiring and an impact resistant polycarbonate front cover which is adaptable to enable the fitting of other components without drilling. Switching category is AC3 and the enclosures are IP65 rated.

Specifikationer
Attribute Value
Power Rating 0.25 kW
Motor Starter Type DOL
Voltage Rating 415 V ac
IP Rating IP65
Phase 3
Number of Poles 3P
Motor Starter Functionality Automatic
Overall Length 160mm
Enclosure Yes
Overall Width 78mm
Overall Depth 108mm
Series LE1
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
845,77 kr
(exkl. moms)
1 057,21 kr
(inkl. moms)
Enheter
Per unit
1 +
845,77 kr
Related Products
IP54 metal housing with 5 x 20mm diameter ...
Description:
IP54 metal housing with 5 x 20mm diameter knockouts. Switching capacity AC3. Available with or without switch disconnectors, versions with disconnectors are padlockable. Attractively styled rust protected pressed steel, finished in grey polyester powder paintStart and mushroom-headed stop pushbuttonsSubstantial ...
Ideal to satisfy the basic protection requirements for ...
Description:
Ideal to satisfy the basic protection requirements for motor starters; thermal overload and short-circuit. Protection against overloads and short-circuitsProtection against phase failure and phase imbalanceProtection against insulation breaks (equipment protection only)Manual resetClass 10 for 3-phase motors.
Approvals: CSA, UL, NEMKO, DEMKO, SEMKO, FIMKO. 'Type ...
Description:
Approvals: CSA, UL, NEMKO, DEMKO, SEMKO, FIMKO. 'Type 2’ co-ordination to IEC 947-4-1Choice of control voltage400//415 VacSupplied with 1 N/O auxiliary contact for contactor & 1 N/O + 1 N/C auxiliary for circuit breakerCoil terminal at bottomDIN rail or screw ...
Fitted TeSys range componentsIP65 protection rating. ...
Description:
Fitted TeSys range componentsIP65 protection rating.