Digilent UNO R3 to Pmod Adapter Board 410-229

  • RS-artikelnummer 136-8283
  • Tillv. art.nr 410-229
  • Tillverkare / varumärke Digilent
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Pmod Shield-Uno Arduino Adapter

The Pmod Shield-Uno is an expansion board compatible with the PIC32MX-based uC32 board (RS 775-7346). The board provides five Digilent 12-pin Pmod™ connectors for Digilent peripheral modules. Note: when plugged into a standard Arduino Uno R3 format processor board, only two Pmod connectors are available. See compatibility guide under 'Technical Reference'.

Designed to help connect a range of Pmods directly, the additional circuitry and connectors on the Pmod shield-uno removes the need for countless cables and wires for connection making it cleaner and far easier to assemble your board.

What’s on-board?
• 5 x 12-pin (2x6) Pmod connectors with TVS ESD protection
• Jumper links for each Pmod connector to select +3.3/+5V power supply
• 6-pin header for SPI serial bus
• I²C serial bus daisy-chain connector
• GPIO, SPI, UART, and I2C support
• Jumper links for optional 2.2kΩ pull-ups on I²C bus SDA/SCL pins

20 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
200,70 kr
(exkl. moms)
250,88 kr
(inkl. moms)
Enheter
Per unit
1 +
200,70 kr
Related Products
The JTAG-HS3 programming cable allows high-speed programming/debugging of ...
Description:
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC. • Separate Vref drives JTAG signal voltages• Vref can be any voltage between +1.8V and +5V• USB 2.0 HS port drives JTAG bus ...
The JTAG-HS2 programming cable allows high-speed programming of ...
Description:
The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC. • Compatible with all Xilinx tools• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)• On-board ADP123AUJZ 300mA voltage regulator• Separate Vref ...
The Microchip MPLAB ICD 4 in-circuit debugger is ...
Description:
The Microchip MPLAB ICD 4 in-circuit debugger is a straight-forward and really fast debugging and programming tool. It is designed to work with the Microchip range of PIC microcontrollers, dcPIC Digital Signal Controllers and CEC flash microcontrollers. The MPLAB ICD ...
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...