Texas Instruments LM2622MM-ADJ/NOPB, Step Up DC-DC Converter, Adjustable 8-Pin, MSOP

  • RS-artikelnummer 162-4690
  • Tillv. art.nr LM2622MM-ADJ/NOPB
  • Tillverkare / varumärke Texas Instruments
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Step-Up (Boost) DC/DC Converters (Integrated Switch), Texas Instruments

DC/DC Switching Regulator Converters (Integrated Switch), Texas Instruments

The range of highly integrated high-efficiency switching voltage regulators from Texas Instruments includes Step-up (Boost), Step-down (Buck), Step-up/down (Boost/Buck) and Inverting types providing efficient solutions for every DC Voltage Regulator application.

Specifikationer
Attribute Value
Minimum Input Voltage 2 V
Maximum Input Voltage 12 V
Maximum Output Current 1.65A
Converter Type Step Up
Number of Outputs 1
Output Type Adjustable
Mounting Type Surface Mount
Package Type MSOP
Pin Count 8
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Load Regulation 6.7 mV/A
Switching Regulator Yes
Height 0.86mm
Efficiency 90%
Maximum Switching Frequency 1.25 MHz
Dimensions 3 x 3 x 0.86mm
Line Regulation 0.013 %/V
Length 3mm
Width 3mm
Tillfälligt slut i lager – restorder för leverans när den finns i lager
Pris (ex. moms) Each (On a Reel of 1000)
9,452 kr
(exkl. moms)
11,815 kr
(inkl. moms)
Enheter
Per unit
Per Reel*
1000 +
9,452 kr
9 452,00 kr
Related Products
Qi is an interface standard developed by the ...
Description:
Qi is an interface standard developed by the Wireless Power Consortium (WPC) for inductive electrical power transfer over distances of up to 4 cm.A Qi-compliant wireless power system consists of a charging pad and receiver. Power transfers from transmitter to ...
Integrated battery charging ICs from Texas Instruments intended ...
Description:
Integrated battery charging ICs from Texas Instruments intended for use with Lithium-Ion & Lithium-Polymer cells. These devices provide a complete charging and monitoring solution and include internal power devices capable of supplying charging currents of up to several amps.
The battery charge monitoring system is the component ...
Description:
The battery charge monitoring system is the component responsible for determining the energy remaining in the battery. It provides information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV). It minimises dependence on host processor and improves ...
Designed specifically for bus termination in DDR and ...
Description:
Designed specifically for bus termination in DDR and QDR memory applications. These sink/source tracking termination regulators are aimed for space saving, low-cost applications with low external part counts.