Schneider Electric Overload Relay NO/NC, 1.2 → 7 A, 7 A, 55 W

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

LR97 D Electronic Overcurrent Relays

Suitable for machine protection requirements where machinery may be subject to difficult starting, jamming, high resistive torque/high inertia and/or mechanical failure
1 N/O and 1 N/C contact
LED status indication: Voltage, Starting, Steady State, Overload, Trip
Trip status monitored: Over-Current, Rotor Locked, Phase Failure (L1, L2, L3)
Manual or automatic reset
H 64.5mm x W 45mm x D 67.5mm

Note

Current range (A) refers to the relay setting range. To allow for tripping sensitivity, the useable current range will be less than the maximum value quoted. Please refer to the manufacturer’s data sheet for specific product information.

Specifikationer
Attribute Value
FLC Motor Rating 1.2 → 7 A
Contact Current Rating 7 A
Range TeSys
Contact Voltage Rating 690 V ac
Mounting Style Direct Contactor
Supply Voltage 24 V ac/dc
Series LR97 D
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Power Rating 55 W
Reset Method Automatic, Manual
Terminal Type Screw
Width 45mm
Length 64.5mm
Depth 67.5mm
Maximum Operating Temperature +60°C
Operating Temperature Range -25 → +60 °C
Minimum Operating Temperature -25°C
3 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
681,24 kr
(exkl. moms)
851,55 kr
(inkl. moms)
Enheter
Per unit
1 - 9
681,24 kr
10 - 14
653,60 kr
15 +
625,26 kr
Related Products
For use with PLC output. Has LED indicator ...
Description:
For use with PLC output. Has LED indicator and supression incorporated (1.8W) and wide range coil 0.7 - 1.3 x rated. voltage. Utilisation category AC-1= 20AScrew clamp connectionDimensions (H x W x D) 58 x 45 x 57mm.
Can be used with all motors equipped with ...
Description:
Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also ...
Provide protection to motors or other machines which ...
Description:
Provide protection to motors or other machines which require the temperature of their windings to be monitored and not exceeded, otherwise serious damage may occur. a.c. or d.c. operating voltagesRated current; 6ADIN rail mountingCan be screw mounted using adaptor (stock ...
ac or dc operating coilsBuilt-in coil suppression on ...
Description:
ac or dc operating coilsBuilt-in coil suppression on dc versions onlySwitching category d2.