Schneider Electric Thermal Overload Relay NO/NC, 3.7 → 5.5 A, 5.5 A, 100 W, 250 V dc, 690 V ac

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): CZ
Produktdetaljer

Schneider Eclectic Mini Thermal Overload Relays - LR2-K Range

Schneider Electrics K thermal overload relays are adjustable from 0.11 to 11.5 A, they have been predominantly designed for use in applications that require motor protection.

This range of mini thermal overload relays feature compensated and phase failure sensitivity, the range also offers manual and automatic reset. Each overload relay has 3-poles and screw clamp terminals.

Features & Benefits

• Commonly referred to by the range short name - LR2K
• Easy maintenance checks, check the tightening of cables through conducting thermographic testing and checking the mechanical operation of the product through manually operating the test, reset and stop buttons
• Direct mounting under a contactor is achievable
• Standards - IEC 947, BS4941, VDE 0660, NFC63-650
• Standards - CSA, UL, DEMKO, NEMKO, SEMKO, FIMKO, PTB

Applications of a Contactor and Control Overload Relay

• The majority of the time is to protect a motor
• To detect both overload conditions and fault conditions to then announce trip command for a protective device
• To deactivate a device whenever it pulls high current
• Sometimes developed into microprocessor systems and solid-state electronics

Schneider Electric TeSys K - Differential Thermal Overload Relay

• The thermal protection adjustment range is 3.7...5.5 A
• Compatible with LP4K, LC1K, LC7K and LP1K
• The network frequency is < = 400 Hz
• Thermal overload class 10A which conforms to IEC 60947-4-1
• Mounting support can be achieved under the contactor, plate - but with specific categories and rail with specific categories
• Yellow trip indicator
• The auxiliary contact composition is 1 NO + 1 NC

Specifikationer
Attribute Value
FLC Motor Rating 3.7 → 5.5 A
Control Voltage 250 V dc, 690 V ac
Contact Current Rating 5.5 A
Pole Configuration 3P
Range TeSys
Contact Voltage Rating 690 V ac
Mounting Style Direct Contactor
Series LR2K
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Power Rating 100 W
Terminal Type Screw
Reset Method Automatic, Manual
Depth 65mm
Width 45mm
Length 116mm
Maximum Operating Temperature +55°C
Operating Temperature Range -20 → +55 °C
Minimum Operating Temperature -20°C
52 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
443,59 kr
(exkl. moms)
554,49 kr
(inkl. moms)
Enheter
Per unit
1 - 9
443,59 kr
10 - 14
425,59 kr
15 +
407,15 kr
Related Products
Tripping class 10 Phase failure sensitivityHand, Automatic or ...
Description:
Tripping class 10 Phase failure sensitivityHand, Automatic or manual reset selectable.
The 3RU21 thermal overload relays up to 80 ...
Description:
The 3RU21 thermal overload relays up to 80 A have been designed for current-sensitive protection of loads with normal starting.These thermal overload relays for use with Sirius Size S0 & S00 Contactors. Switch position indicator and test functionSTOP buttonSelector switch ...
Type RF38, phase failure sensitive, manual or automatic ...
Description:
Type RF38, phase failure sensitive, manual or automatic resettingType RFN38, non phase failure sensitive, manual or automatic resettingType RF82 and RF95, phase failure sensitive, manual resettingType RFA82 and RFA95, phase failure sensitive, automatic resettingType RFN82 and RFN95, non phase failure ...
Range of TeSys thermal relays for motor protection.Compensated, ...
Description:
Range of TeSys thermal relays for motor protection.Compensated, with automatic or manual reset, and trigger display.Equipped with test function.To be mounted on LC1 type contactors from the TeSys range.No direct fitting on old contactors (add panel ) for refs. LRD01 ...