Cypress Semiconductor CYW943907AEVAL1F, CYW43907 WiFi Development Kit

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

CYW43907 2.4/5GHz WiFi Evaluation Kit

The CYW943907AEVAL1F evaluation kit enables customers to evaluate and develop single-chip WiFi applications based upon Cypress CYW43907 devices. The kit makes use of the WICED Studio 5.0 IDE. It has an embedded TCP/IP network stack, security supplicant and other network application features.

• Murata CYW43907-1GC Cortex-R4 SoC WiFi/Ethernet SIP Module • Wireless Protocol: IEEE 802.11a/b/g/n
• RF Frequency Ranges: 2.4GHz and 5.8GHz
• RF Output Power: +12dBm @ 65Mbps, +17dBm @ 11Mbps
• Receiver Sensitivity: -75dBm @ 65Mbps (2.4GHz), -73dBm @ 65Mbps (5.8GHz)
• On-board programmer/debugger using USB interface and USB-UART bridge
• On-board MAX11615 6-channel 12-bit ADC on I²C bus
• On-board BCM5241 Ethernet PHY chip
• Host communication: Ethernet, SPI, I²C, UART
• 6 x PWM outputs
• Reset pushbutton
• 2 x User pushbuttons
• 2 x User LEDs
• RJ45 socket for Ethernet connection
• MicroSD card slot
• 2 x PCB antennas for antenna diversity
• 2 x External antenna sockets
• 10-pin JTAG connector for CYW43907 programming/debug
• 44-pin WICED GPIO header
• Arduino r3 compatible Shield headers
• Power supply: +5Vdc from USB micro-B socket or +5 to +12Vdc via barrel jack socket

Supplied with

Quick Start Guide, USB-A to Micro-B cable

Specifikationer
Attribute Value
RF Technology WiFi
Kit Classification Development Kit
Featured Device CYW43907
Frequency 2.4 GHz, 5 GHz
14 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
774,36 kr
(exkl. moms)
967,95 kr
(inkl. moms)
Enheter
Per unit
1 +
774,36 kr
Related Products
The USB to Serial Bridge Controller provides a ...
Description:
The USB to Serial Bridge Controller provides a single configurable serial channel for UART/I²C/SPI interfaces, with low power consumption in stand-by mode.The CY7C65211 controller integrates CapSense capacitive-touch sensing technology (for touch sensitive key switches), and Battery Charging Detection logic. The ...
The USB-Serial Bridge Controller offers dual configurable serial ...
Description:
The USB-Serial Bridge Controller offers dual configurable serial channels for UART/I²C/SPI interfaces, with low power consumption in stand-by mode.The CY7C65215 controller integrates CapSense capacitive-touch sensing technology (for touch sensitive key switches) and Battery Charging Detection logic. The controller ...
The Cypress Semiconductor USB development kit is a ...
Description:
The Cypress Semiconductor USB development kit is a super speed USB 3.3 peripheral controller providing integrated and flexible features. It has a fully configurable, parallel, a general programmable interface called GPIF II, which can connect to any processor, ASIC or ...
The ST25DV-DISCOVERY is a demonstration kit to evaluate ...
Description:
The ST25DV-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the ST25DV series of dynamic NFC/RFID tag ICs. • 168MHz STM32F415VGT6 Cortex-M4F MCU with 1MB Flash memory, 192 + 4KB SRAM • On-board ST-LINK hardware for microcontroller ...