Infineon TLE62543GXUMA1, CAN Transceiver 125kBd 1-Channel CAN, 14-Pin PG-DSO

  • RS-artikelnummer 178-7458
  • Tillv. art.nr TLE62543GXUMA1
  • Tillverkare / varumärke Infineon
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

CAN Bus Tranceivers, Infineon

Infineon’s CAN (Control Area Network) transceivers are designed for use in the automotive industry. The data rate can go up to 1Mbps and they have different features including receive only mode, INH output as well as Bus wake up inputs. The Automotive CAN Transceiver is used to working in tough environments and may even be apply in modern vehicles like Body, Safety and Powertrain.

ISO 11898 International Standard

CAN Bus (Controller Area Network) Communication

Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also used in other areas.
CAN transceivers allow protocol layer CAN controllers to access the physical layer bus.

Specifikationer
Attribute Value
Maximum Data Rate 125kBd
Number of Transceivers 1
Standard Supported CAN
Power Down Mode Sleep, Standby
Maximum Supply Current 10 mA
Mounting Type Surface Mount
Package Type PG-DSO
Pin Count 14
Dimensions 8.75 x 4 x 1.47mm
Length 8.75mm
Width 4mm
Height 1.47mm
Maximum Operating Supply Voltage 5.25 V
Maximum Operating Temperature +150 °C
Automotive Standard AEC-Q100
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 4.75 V
Tillfälligt slut i lager – restorder för leverans när den finns i lager
Pris (ex. moms) Each (On a Reel of 2500)
8,044 kr
(exkl. moms)
10,055 kr
(inkl. moms)
Enheter
Per unit
Per Reel*
2500 +
8,044 kr
20 110,00 kr
Related Products
Description:
LIN is a small, serial, slow, and cheap bus system. LIN is based on one master node and a number of LIN slaves (up to 16). It is a low-cost concept for automobile networks, for which it standardizes the transmission ...
Description:
The ROHM SOP-J8 1 channel 8 pin LIN transceiver has a data transfer speed of 20kbit/s. It is the best transceiver for the BUS system that needs LIN (Local Interconnect Network) master and slave protocol. This transceiver is available in ...
Description:
LIN is a small, serial, slow, and cheap bus system. LIN is based on one master node and a number of LIN slaves (up to 16). It is a low-cost concept for automobile networks, for which it standardizes the transmission ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...