NXP PCA82C250T/YM,112, CAN Transceiver 1MBd 1-Channel ISO 11898, 8-Pin SOIC

  • RS-artikelnummer 103-8136
  • Tillv. art.nr PCA82C250T/YM,112
  • Tillverkare / varumärke NXP
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): TH
Produktdetaljer

CAN Controllers, NXP

Note

NXP is a trademark of NXP B.V.

CAN Bus (Controller Area Network) Communication

Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also used in other areas.
CAN transceivers allow protocol layer CAN controllers to access the physical layer bus.

Specifikationer
Attribute Value
Maximum Data Rate 1MBd
Number of Transceivers 1
Standard Supported ISO 11898
Power Down Mode Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 5 x 4 x 1.45mm
Length 5mm
Width 4mm
Height 1.45mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 4.5 V
100 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Tube of 100)
11,656 kr
(exkl. moms)
14,57 kr
(inkl. moms)
Enheter
Per unit
Per Tube*
100 - 400
11,656 kr
1 165,60 kr
500 - 900
10,724 kr
1 072,40 kr
1000 +
10,141 kr
1 014,10 kr
Relaterte Produkter
Description:
The ROHM SOP-J8 1 channel 8 pin LIN transceiver has a data transfer speed of 20kbit/s. It is the best transceiver for the BUS system that needs LIN (Local Interconnect Network) master and slave protocol. This transceiver is available in ...
The MCP2542FD CAN transceiver is designed for high-speed ...
Description:
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, ...
The Microchip technology 1 channel, 1Mbit/s CAN transceiver ...
Description:
The Microchip technology 1 channel, 1Mbit/s CAN transceiver has 8 pins and PDIP package type. This device is a high speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The Local ...
Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, ...
Description:
Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, DFN and SOIC packages MCP2003-LIN-compatible driver with WAKE pin MCP2004-LIN-compatible driver with FAULT/TXE pin. This device provides a bidirectional, half-duplex communication physical interface. The device is short circuit and overtemp protected ...