Silicon Labs TS1103-25DB, Current Sensing Amplifier Demonstration Board for TS1103-25

  • RS-artikelnummer 894-7077
  • Tillv. art.nr TS1103-25DB
  • Tillverkare / varumärke Silicon Labs
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): US
Produktdetaljer

TS1103 Bidirectional Current-Sense Amplifier Demo Board

Demonstration boards for the TS1103, available in a choice of four gain options; 25, 50, 100 and 200. These boards are fully assembled and tested. The board is configured with an 50 mOhm resistor.

They have five dedicated test points; RS+, RS-, VDD, SIGN and output voltage. These boards include decoupling capacitor pad at the VBATT input pin and a 47nF capacitor at the VOUT output pin. The demo board can be set up to sense current in both directions.

The TS1103 has a wide input voltage range from 1.6 to 27 Volts and available in 6-pin SOT23 packages.

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specifikationer
Attribute Value
Analogue Function Current Sensing Amplifier
Kit Classification Demonstration Board
Featured Device TS1103-25
Tillfälligt slut i lager – restorder för leverans 2020-08-03
Pris (ex. moms) Each
562,91 kr
(exkl. moms)
703,64 kr
(inkl. moms)
Enheter
Per unit
1 +
562,91 kr
Related Products
The Microchip PIC32MZ Embedded Connectivity (EC) Adaptor Board, ...
Description:
The Microchip PIC32MZ Embedded Connectivity (EC) Adaptor Board, which features a 168-pin to 132-pin connector, enables the use of PIC32 starter kits that have a 168-pin interface with the following PIC32 hardware:. Multimedia Expansion Board (MEB) - Part # DM320005PIC32 ...
The NB3N3020DTG is a high precision, low phase ...
Description:
The NB3N3020DTG is a high precision, low phase noise selectable clock multiplier. The device takes a 5 - 27 MHz fundamental mode parallel resonant crystal or a 2 - 210 MHz LVCMOS single ended clock source and generates a differential ...
The NB7V33M is a differential divide by 4 ...
Description:
The NB7V33M is a differential divide by 4 Clock divider with asynchronous reset. The differential Clock inputs incorporate internal 50-ohm termination resistors and will accept LVPECL, CML and LVDS logic levels. The NB7V33M produces a div 4 output copy of ...
This range of socket cards from Atmel allows ...
Description:
This range of socket cards from Atmel allows you to connect a range of different pin type and size devices to the ATK600 Starter Kit.•PDIP8/14/20/28/40 720-0143•QFN32 769-1653•QFN44 769-1669•QFN48 769-1650•QFN64 769-1656•QFP32 0.8 mm pitch 720-0153•QFP44 0.8 mm pitch ...