Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filter

    Visar 1 - 20 av 156 produkter
    Resultat per sida
    Beskrivning Pris Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Calibrated Safety Category Level
    RS-artikelnummer 764-8696
    Tillv. art.nr34133A
    337,00 kr
    Each
    Enheter
    Right Angle Plug - Pogo Pin - 1.2m 3A - CAT II - - - -
    RS-artikelnummer 412-129
    Tillv. art.nrFLUKE TLK289 EUR
    VarumärkeFluke
    1 807,00 kr
    Each
    Enheter
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - 1.5m 3 A, 10 A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-artikelnummer 436-866
    Tillv. art.nrTLK289
    VarumärkeFluke
    1 621,00 kr
    Each
    Enheter
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - - - - - - - - -
    RS-artikelnummer 243-2998
    VarumärkeRS PRO
    100,00 kr
    Each
    Enheter
    Test Lead Kit - Crocodile Clip, Right Angle Plug - 1.2m 10A 1000V CAT III 1000 V - - - CAT III
    RS-artikelnummer 442-8294
    Tillv. art.nr80K-40
    VarumärkeFluke
    2 852,00 kr
    Each
    Enheter
    High Voltage Probe - Banana Plug - - 20µA 40000V CAT I 40000 V - - - CAT I
    RS-artikelnummer 705-1276
    Tillv. art.nrTL175E
    VarumärkeFluke
    308,00 kr
    Each
    Enheter
    Test Lead - 4 mm Banana Plug - 1.2m 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V - - - CAT II, CAT III
    RS-artikelnummer 449-9870
    Tillv. art.nrTL221
    VarumärkeFluke
    315,00 kr
    Each
    Enheter
    Extension Lead Set - Female Coupler, Straight - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-artikelnummer 334-6602
    Tillv. art.nr1632758
    VarumärkePomona
    222,28 kr
    Each
    Enheter
    Test Lead - - - - - - - - - - -
    RS-artikelnummer 468-7415
    Tillv. art.nrTL76
    VarumärkeFluke
    397,00 kr
    Each
    Enheter
    Test Lead Kit - Banana Plug, Shrouded 4 mm - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-artikelnummer 360-0300
    Tillv. art.nrTT-HVP40
    VarumärkeTestec
    929,79 kr
    Each
    Enheter
    High Voltage Probe - Crocodile Clip, Plug - 1m - 40000V CAT I 0°C +50°C - CAT I
    RS-artikelnummer 493-3257
    Tillv. art.nrTP81
    VarumärkeFluke
    542,00 kr
    Pr. Set
    Sats(er)
    Insulation Piercing Clip Set - Banana Jack - - - - - - - - -
    RS-artikelnummer 738-339
    Tillv. art.nr932793001
    258,89 kr
    Each
    Enheter
    Test Equipment Set - Crocodile Clip, Spring Loaded Plug - 1m - - - -15°C +70°C - -
    RS-artikelnummer 692-7147
    Tillv. art.nr11059A
    1 644,00 kr
    Each
    Enheter
    Kelvin Probe Set - Banana Plug - 800mm - - - - - - -
    RS-artikelnummer 726-3624
    Tillv. art.nrTL75-1
    VarumärkeFluke
    237,00 kr
    Each
    Enheter
    Test Lead Kit - Banana Plug - 1.22m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-artikelnummer 741-4358
    Tillv. art.nrTL175
    VarumärkeFluke
    285,00 kr
    Each
    Enheter
    Test Lead Kit - Shrouded - - 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V -20°C +55°C - CAT III, CAT IV
    RS-artikelnummer 450-2358
    Tillv. art.nrTL224
    VarumärkeFluke
    308,00 kr
    Each
    Enheter
    Silicone Test Lead Set - Banana Plug - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-artikelnummer 204-599
    VarumärkeRS PRO
    454,00 kr
    Each
    Enheter
    Fused Probe Kit - Straight Plug Yes 1.2m - 600, 1000 V 600 CAT III V, 1000 CAT III V -10°C +150°C - CAT III
    RS-artikelnummer 731-8982
    Tillv. art.nrTL80A-1
    VarumärkeFluke
    734,00 kr
    Each
    Enheter
    Electronic Test Lead Kit - Crocodile Clip - 1m 3 A, 5 A 300V CAT II 300 V - - - CAT II
    RS-artikelnummer 412-119
    Tillv. art.nrFLUKE TLK287
    VarumärkeFluke
    1 807,00 kr
    Each
    Enheter
    Electronic Master Test Lead Kit - Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug - - 2 A, 5 A, 10 A 300 V, 1000 V CAT II 300 V, CAT III 1000 V - - - CAT II, CAT III
    RS-artikelnummer 468-7358
    Tillv. art.nrL215
    VarumärkeFluke
    893,00 kr
    Each
    Enheter
    SureGrip Kit with Probe Light & Extender - - - - - - - - - - -
    Related Products
    RS Pro back probe pin set made from ...
    Description:
    RS Pro back probe pin set made from durable steel. Perfect for connecting to fuel injectors, MAP and TPS sensors and any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4 mm plug whether shrouded ...
    Brought to you by RS PRO, a back ...
    Description:
    Brought to you by RS PRO, a back probe pin set, made from durable steel. Perfect for connecting to fuel injectors, MAP and TPS sensors and any weather pack seal type connectors. The modular design is compatible with any industry-standard, ...
    High quality 2mm test lead set suitable for ...
    Description:
    High quality 2mm test lead set suitable for testing smaller components and installations.Kit comprises of:,Red and black test probes ,Red and black test hooks,Red and black crocodile clips,Red and black 1m test leads (stackable),Maximum working voltage 60V d.c.
    Schutzinger 4mm panel mount socket connectors , these ...
    Description:
    Schutzinger 4mm panel mount socket connectors , these IBU 5568 series threaded socket connectors feature a single pole and are utilised for the transmission of voltages, currents and electrical test data, part of the Shutzinger Ø 4mm programme range. Maximum ...