Pneumatic Pin Cylinders

Pneumatic pin (needle) cylinders are compact (space saving) mechanical devices that transform compressed air power into linear forces to drive a mechanical motion. A cylinder consists of a piston, rod and plunger surrounded by a cylindrical bore.

These cylinders occupy less space than other pneumatic cylinders because components like switches can be mounted onto them via panel (on top of device) or embedded mounting (inside device).

Their bodies are made of brass and the rods are constructed of stainless steel for extra durability. They do not require additional lubrication which makes them relatively maintenance free.

What are pneumatic pin cylinders used for?

Pin cylinders are used for precision parts assembling in tight spaces. For example during automated soldering activities where components to be joined (soldered) are located behind panel enclosures and can only be accessed through tiny openings.

Types of pneumatic pin cylinders

  • Single acting means there is one port from where the compressed air flows to push the rod out. The rod is then retracted with a spring mechanism.
  • Double acting means there are two ports from which compressed air can flow out and back in to push and retract the rod.

...
Read more Read less

Filter

Visar 21 - 40 av 48 produkter
Resultat per sida
Beskrivning Pris Manufacturer Series Action Bore Stroke Piston Speed Absolute Maximum Pressure Cushioning Type Force at 7 bar Port Connection Dimensions Weight Minimum Piston Speed Diameter Height
RS-artikelnummer 547-631
Tillv. art.nrCDJP2B16-40D
VarumärkeSMC
385,03 kr
Each
Enheter
CJP2 Double 16mm 40mm 50 500mm/s - Rubber - M5 x 0.8 83.5 x 20 x 24.5mm 71g 50mm/s - 24.5mm
RS-artikelnummer 183-4012
Tillv. art.nrCJPB15-15H6
VarumärkeSMC
264,46 kr
Each
Enheter
CJP Single 15mm 15mm 50 500mm/s - Not Cushioned - M5 x 0.8 50 x 27 x 31mm 92g 50mm/s - 31mm
RS-artikelnummer 547-552
Tillv. art.nrCDJP2B10-40D
VarumärkeSMC
346,53 kr
Each
Enheter
CJP2 Double 10mm 40mm 50 500mm/s - Rubber - M3 x 0.5 79.5 x 15 x 19mm 45g 50mm/s - 19mm
RS-artikelnummer 547-578
Tillv. art.nrCDJP2B16-30D
VarumärkeSMC
369,84 kr
Each
Enheter
CJP2 Double 16mm 30mm 50 500mm/s - Rubber - M5 x 0.8 73.5 x 20 x 24.5mm 63g 50mm/s - 24.5mm
RS-artikelnummer 547-556
Tillv. art.nrCDJP2B6-15D
VarumärkeSMC
277,63 kr
Each
Enheter
CJP2 Double 6mm 15mm 50 500mm/s - Rubber - M3 x 0.5 48 x 14 x 16.5mm 21g 50mm/s - 16.5mm
RS-artikelnummer 838-8800
Tillv. art.nrCDJP2D16-30D
VarumärkeSMC
464,80 kr
Each
Enheter
CJP2 Double 16mm 30mm 10 500mm/s 1MPa Rubber 121 (Retract) N, 140.7 (Extend) N - 93 x 22 x 25.5mm 80.2g 10mm/s - 25.5mm
RS-artikelnummer 547-562
Tillv. art.nrCDJP2B10-25D
VarumärkeSMC
323,74 kr
Each
Enheter
CJP2 Double 10mm 25mm 50 500mm/s - Rubber - M3 x 0.5 64.5 x 15 x 19mm 37g 50mm/s - 19mm
RS-artikelnummer 547-528
Tillv. art.nrCDJP2B10-30D
VarumärkeSMC
330,84 kr
Each
Enheter
CJP2 Double 10mm 30mm 50 500mm/s - Rubber - M3 x 0.5 69.5 x 15 x 19mm 40g 50mm/s - 19mm
RS-artikelnummer 547-506
Tillv. art.nrCDJP2B16-10D
VarumärkeSMC
338,43 kr
Each
Enheter
CJP2 Double 16mm 10mm 50 500mm/s - Rubber - M5 x 0.8 53.5 x 20 x 24.5mm 46g 50mm/s - 24.5mm
RS-artikelnummer 547-635
Tillv. art.nrCDJP2B6-25D
VarumärkeSMC
293,33 kr
Each
Enheter
CJP2 Double 6mm 25mm 50 500mm/s - Rubber - M3 x 0.5 58 x 14 x 16.5mm 25g 50mm/s - 16.5mm
RS-artikelnummer 547-613
Tillv. art.nrCDJP2B16-20D
VarumärkeSMC
354,14 kr
Each
Enheter
CJP2 Double 16mm 20mm 50 500mm/s - Rubber - M5 x 0.8 63.5 x 20 x 24.5mm 54g 50mm/s - 24.5mm
RS-artikelnummer 890-3231
Tillv. art.nrCDJ2B10-15Z-B
VarumärkeSMC
339,57 kr
Each
Enheter
- Double 10mm 15mm 50 750mm/s 1.05MPa Rubber - M5 x 0.8 89 x 12 x 12mm 24g 50mm/s - 12mm
RS-artikelnummer 890-3266
Tillv. art.nrCDJ2B16-60Z-B
VarumärkeSMC
427,35 kr
Each
Enheter
- Double 16mm 60mm 50 750mm/s 1.05MPa Rubber - M5 x 0.8 135 x 18 x 18mm 55g 50mm/s - 18mm
RS-artikelnummer 264-6153
Tillv. art.nrCJ1B4-15SU4
VarumärkeSMC
185,93 kr
Each
Enheter
CJ1 Single 4mm 15mm 50 500mm/s - Not Cushioned - U4 5 (Dia.) x 58mm 5.6g 50mm/s 5mm -
RS-artikelnummer 547-619
Tillv. art.nrCDJP2B10-5D
VarumärkeSMC
292,83 kr
Each
Enheter
CJP2 Double 10mm 5mm 50 500mm/s - Rubber - M3 x 0.5 44.5 x 15 x 19mm 27g 50mm/s - 19mm
RS-artikelnummer 890-3244
Tillv. art.nrCDJ2B10-45Z-B
VarumärkeSMC
369,14 kr
Each
Enheter
- Double 10mm 45mm 50 750mm/s 1.05MPa Rubber - M5 x 0.8 119 x 12 x 12mm 24g 50mm/s - 12mm
RS-artikelnummer 844-4486
Tillv. art.nrNCDJ2D10-100-B
VarumärkeSMC
319,42 kr
Each
Enheter
NCJ2 Double 9.53mm 25.4mm 50 750mm/s 1MPa Rubber - 10-32 UNF 3.91 x 0.47 x 0.47in 50.6g 50mm/s - 11.94mm
RS-artikelnummer 686-2554
Tillv. art.nrCUJB10-10S
VarumärkeSMC
254,83 kr
Each
Enheter
CUJ Single 10mm 10mm 50 500mm/s - Not Cushioned - M3 x 0.5 29 x 13.5 x 22mm 22.3g 50mm/s - 22mm
RS-artikelnummer 547-534
Tillv. art.nrCDJP2B10-10D
VarumärkeSMC
300,43 kr
Each
Enheter
CJP2 Double 10mm 10mm 50 500mm/s - Rubber - M3 x 0.5 49.5 x 15 x 19mm 29g 50mm/s - 19mm
RS-artikelnummer 849-7522
Tillv. art.nrNCJ2B16-100
VarumärkeSMC
325,66 kr
Each
Enheter
NCJ2B16 Double 16mm 25.4mm 50 750mm/s 1MPa Rubber - 10-32 UNF 18.03 (Dia.) x 74.93 (L)mm 98g 50mm/s 18.03mm -
Related Products
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...
Miniature pin cylinders for panel mount. All cylinders ...
Description:
Miniature pin cylinders for panel mount. All cylinders are single acting with spring return. Lubrication not requiredThreaded rod-end styleNon-cushionedProof pressure 10.5 barOperating pressure 2 bar, 6mm dia and 1.5 bar, 10mm/15mm dia (min) 7 bar (max)Ambient and fluid temperature 5°C ...
SMC NCJ2 series of miniature cylinders offer a ...
Description:
SMC NCJ2 series of miniature cylinders offer a stainless steel body and stainless steel rods. They are a compact and lightweight highly accurate pneumatic cylinder. Available in bore sizes 6, 10, 16 mm, and a wide range of stroke lengths. ...