Heatsink Mounting Accessories

Heatsink mounting accessories support the attachment of heatsinks to their components. Heatsinks are passive heat exchangers: they take the heat generated by electrical or mechanical devices and transfer it to a disposable medium, often liquid coolant or air. There's a wide selection of heatsink mounting accessories, including clips, adhesive tape, retaining springs, hi-flow insulators and graphite pads. Choosing the right mounting accessories can improve your heatsinks performance.

Types of heatsink mounting accessories

A range of heatsink mounting accessories is available, depending on your needs. Spring clips can be used with all sizes of vertical-mount heatsinks where transistors have no mounting tabs. Heatsink spring mount rivets are used to fasten a heatsink to a processor on a printed circuit board. They provide continuous pressure to a heatsink to improve the conductivity. For an alternative to screw mounting and clip mounting, adhesive tape allows a double-sided high bond-strength attachment.

Why use heatsink mounting accessories?

Heatsink mounting accessories provide greater reliability within your cooling system and ensure it can operate to its best ability. The right accessories can also contribute to reduced energy use and lower costs.


...
Read more Read less

Filter

Visar 1 - 20 av 60 produkter
Resultat per sida
Beskrivning Pris Accessory Type For Use With
RS-artikelnummer 504-0615
Tillv. art.nrTHFM10
VarumärkeFischer Elektronik
16,627 kr
Each (In a Pack of 10)
Enheter
Retaining Spring TO-218, TO-220, TO-247, TO-264
RS-artikelnummer 722-6937
Tillv. art.nrTHFU 4
VarumärkeFischer Elektronik
2,254 kr
Each (In a Pack of 25)
Enheter
Retaining Spring LAM Heatsink, SK Heatsink, TO-218, TO-220, TO-247, TO-248, TO-3P
RS-artikelnummer 504-0592
Tillv. art.nrTHFM1
VarumärkeFischer Elektronik
2,223 kr
Each (In a Pack of 10)
Enheter
Retaining Spring TO-218, TO-220, TO-247, TO-264
RS-artikelnummer 131-1238
VarumärkeRS PRO
5,186 kr
Each (In a Pack of 5)
Enheter
Spring Clip TO-218, TO-220, TO-247, TO-3P
RS-artikelnummer 402-456
Tillv. art.nrW4605 KIT
VarumärkeWinslow
52,19 kr
Pr. Kit
Sats(er)
Transistor Mount Kit TO-220
RS-artikelnummer 131-1238A
VarumärkeRS PRO
5,274 kr
Each (In a Pack of 25)
Enheter
Spring Clip TO-218, TO-220, TO-247, TO-3P
RS-artikelnummer 477-4878
Tillv. art.nrBP100-0.005-00-00-25
VarumärkeBergquist
13,142 kr
Each (In a Pack of 10)
Enheter
Adhesive Tape Heatsink
RS-artikelnummer 477-4862
Tillv. art.nrBP100-0.005-00-00-50
VarumärkeBergquist
32,547 kr
Each (In a Pack of 10)
Enheter
Adhesive Tape Heatsink
RS-artikelnummer 504-0766
Tillv. art.nrICKSMDBOX
VarumärkeFischer Elektronik
1 459,55 kr
Each
Enheter
Heat Sink Box SMD
RS-artikelnummer 203-791
Tillv. art.nrTHFU 2
VarumärkeFischer Elektronik
1,40 kr
Each (In a Pack of 100)
Enheter
Retaining Spring LAM Heatsink, SK Heatsink, TO-218, TO-220, TO-247, TO-248, TO-3P
RS-artikelnummer 877-7086
Tillv. art.nrILA-ADAPT-WIRESET-001
149,72 kr
Each
Enheter
- Linear Heatsink
RS-artikelnummer 722-6921
Tillv. art.nrTHFU 1
VarumärkeFischer Elektronik
1,564 kr
Each (In a Pack of 25)
Enheter
Retaining Spring LAM Heatsink, SK Heatsink, TO-218, TO-220, TO-247, TO-248, TO-3P
RS-artikelnummer 722-6934
Tillv. art.nrTHFU 3
VarumärkeFischer Elektronik
1,911 kr
Each (In a Pack of 25)
Enheter
Retaining Spring LAM Heatsink, SK Heatsink, TO-218, TO-220, TO-247, TO-248, TO-3P
RS-artikelnummer 263-239
VarumärkeRS PRO
22,47 kr
Pr. Kit
Sats(er)
Transistor Mount Kit TO-3
RS-artikelnummer 489-5795
Tillv. art.nrCL-BU-35X35
VarumärkeMalico
9,864 kr
Each (In a Pack of 5)
Enheter
Clip MBH35 BGA Heatsink
RS-artikelnummer 489-5947
Tillv. art.nrCL-Y-29X29
VarumärkeMalico
6,284 kr
Each (In a Pack of 5)
Enheter
Clip MBH29 BGA Heatsink
RS-artikelnummer 489-5802
Tillv. art.nrCL-BU-40X40
VarumärkeMalico
8,328 kr
Each (In a Pack of 5)
Enheter
Clip MBH40 BGA Heatsink
RS-artikelnummer 489-5969
Tillv. art.nrCL-Y-35X35
VarumärkeMalico
10,628 kr
Each (In a Pack of 5)
Enheter
Clip MBH35 BGA Heatsink
RS-artikelnummer 754-5954
Tillv. art.nrHSR-2
VarumärkeRichco
2,535 kr
Each (In a Bag of 20)
Enheter
Spring Mount Rivet Heatsink
RS-artikelnummer 485-8897
VarumärkeRS PRO
7,412 kr
Each (In a Pack of 5)
Enheter
Gull Wing Clip TO-220
Related Products
Transistor spring clips designed for single point fixing ...
Description:
Transistor spring clips designed for single point fixing of power transistors such as TO220, TO218, TO247 and TO3P to their heatsinksThey provide strong central pressure (max. 7.5kg) to maximise the thermal transfer properties to the heatsink with only one circular ...
Ohmite C series heatsinks are high performance, compact ...
Description:
Ohmite C series heatsinks are high performance, compact heatsinks with an integrated camming clip system for TO-126, TO-247, TO-220 and TO-264 packages. This powerful heat sink provides tool and fixture free assembly operation, largest surface areas and smallest space occupation. ...
Plug-in style heatsink featuring four spring action clips,Firmly ...
Description:
Plug-in style heatsink featuring four spring action clips,Firmly hold the device to the heatsink ensuring maximum metal to metal thermal contact,Available with or without solderable mounting tabs for both horizontal and vertical mounting to the PC board.
Ohmite W Series heat sinks combine a tin ...
Description:
Ohmite W Series heat sinks combine a tin plated, solderable, integral spring clip with an extruded aluminium heat sink body for an all-in-one solution to through-hole mounting of TO-220, TO-247, and TO-264 packages. These self-aligning heat sinks feature solderable feet ...