Heat-Shrink & Cold-Shrink Sleeves

Heat Shrink
Heat shrink tubing is a type of extruded plastic tube that reduces in size when heated to a pre-determined shrink ratio to fit a specific application. A sleeve should be selected in a size larger than required to cover both the wire and components it is to be used with, before being shrunk to fit. Once fitted, the sleeve provides long lasting durability.

Materials and Types
Heat shrink is available in various different materials, colours, sizes and shrink ratios to suit the application required. Some are available with an adhesive lining that helps to bond the tubing with the cables and components.
Polyolefin is the most common material as it is highly durable and can withstand high temperatures without a restricted shelf life. They are also manufactured from PVC, fluoropolymer, neoprene and elastomeric materials. The material is often cross linked to assist with the tubing shrinking back to its original dimensions.
The pre-determined shrink ratio, for example, 2:1 or 3:1, is the measurement of how small the sleeve goes in comparison to its expanded size. When the number is higher in the shrink ratio the greater the shrinkage. It allows a precise, secure fit that does not come off easily.
Applications
Heat shrink tubing is versatile and easy to use therefore it can be applied in an assortment of applications, the most common uses being:
• Electrical insulation – covering joints and repairs
• Strain relief – relieving pressure from the cable
• Wire bundling – in harness building and cable organisation
• Environmental and mechanical protection – preventing damage from abrasion, moisture, dust and chemicals
• Identification – the wide range of colours the tubing is manufactured in allows it to be used for colour coding and component ID
Installation
When selecting the right size tubing, you should consider the maximum and minimum diameter of what you are covering. Use this information to check against the recovered diameter (the diameter after shrinking) and expanded diameter (the pre-shrinkage diameter) of the sleeve.

You can cut most tubing to a suitable length using standard scissors. The unshrunk tubing can be slid over the area or objects it is to cover. Then with a hand held heat gun or heat shrink oven, the sleeve is shrunk tightly. To prevent uneven shrinkage or overheating, check the recommended heating temperature beforehand.

...
Read more Read less

Filter

Visar 1 - 20 av 1519 produkter
Resultat per sida
Beskrivning Pris Sleeve Diameter Shrunk Diameter Colour Sleeve Type Adhesive Lined Shrink Ratio Sleeve Length Material Flame Retardant Halogen Free Series Standards Met
RS-artikelnummer 481-1797
VarumärkeRS PRO
58,97 kr
Each
Enheter
6.4mm 2mm Black Heat Shrink Yes 3:1 1.2m Polyolefin Yes No - AMS-DTL-23053/4 Class 3, RoHS Compliant, UL 224 E75077 CSA C22.2 No.198.1
RS-artikelnummer 443-4952
VarumärkeRS PRO
274,18 kr
1 Bag of 20
Påse(ar)
12.7mm 6.4mm Clear Heat Shrink No 2:1 300mm Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 399-940
VarumärkeRS PRO
27,342 kr
Each (In a Pack of 5)
Enheter
9.5mm 4.8mm Clear Heat Shrink No 2:1 1.2m Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 443-4946
VarumärkeRS PRO
151,38 kr
1 Bag of 20
Påse(ar)
9.5mm 4.8mm Clear Heat Shrink No 2:1 300mm Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 399-956
VarumärkeRS PRO
36,456 kr
Each (In a Pack of 5)
Enheter
12.7mm 6.4mm Clear Heat Shrink No 2:1 1.2m Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 399-524
VarumärkeRS PRO
28,384 kr
Each (In a Pack of 5)
Enheter
6.4mm 3.2mm Yellow Heat Shrink No 2:1 1.2m Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 399-962
VarumärkeRS PRO
43,142 kr
Each (In a Pack of 5)
Enheter
19.1mm 9.5mm Clear Heat Shrink No 2:1 1.2m Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 666-880
VarumärkeRS PRO
477,60 kr
1 Box of 20
Låda(or)
4.8mm 2.4mm Black Heat Shrink No 2:1 20m Polyolefin Yes No - RoHS Compliant, UL
RS-artikelnummer 398-199
VarumärkeRS PRO
18,764 kr
Each
Enheter
4.8mm 2.4mm Black Heat Shrink No 2:1 1.2m Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 443-4968
VarumärkeRS PRO
302,96 kr
1 Bag of 20
Påse(ar)
19.1mm 9.5mm Clear Heat Shrink No 2:1 300mm Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 417-7255
VarumärkeRS PRO
121,10 kr
1 Bag of 20
Påse(ar)
4.8mm 2.4mm Black Heat Shrink No 2:1 300mm Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 399-934
VarumärkeRS PRO
20,342 kr
Each (In a Pack of 5)
Enheter
6.4mm 3.2mm Clear Heat Shrink No 2:1 1.2m Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 389-662
VarumärkeRS PRO
403,59 kr
1 Reel of 15 Metre(s)
Rulle(ar)
6.4mm 3.2mm Black Heat Shrink No 2:1 15m Polyolefin No No - ELV, RoHS Compliant, SFP (R4-0580)
RS-artikelnummer 443-4930
VarumärkeRS PRO
193,01 kr
1 Bag of 20
Påse(ar)
6.4mm 3.2mm Clear Heat Shrink No 2:1 300mm Polyolefin No Yes - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 267-2203
VarumärkeRS PRO
42,89 kr
1 Bag of 1
Påse(ar)
4.8mm 2.4mm Red Heat Shrink No 2:1 1.2m Polyolefin Yes Yes - BS3G 198 Part 3 Type 15, DEF 59-97 Issue3 Type 8, E1042-A6-March 2002, IEC 60684-3-216 Type C, RoHS Compliant
RS-artikelnummer 700-4548
VarumärkeRS PRO
110,22 kr
1 Reel of 4 Metre(s)
Rulle(ar)
12mm 4mm Black Heat Shrink No 3:1 4m Polyolefin Yes No - UL
RS-artikelnummer 700-4674
VarumärkeRS PRO
15,138 kr
Each
Enheter
3.2mm 1.6mm Red Heat Shrink No 2:1 10m Polyolefin Yes No - UL
RS-artikelnummer 398-290
VarumärkeRS PRO
28,384 kr
Each (In a Pack of 5)
Enheter
6.4mm 3.2mm Red Heat Shrink No 2:1 1.2m Polyolefin Yes No - -
RS-artikelnummer 417-7249
VarumärkeRS PRO
111,01 kr
1 Bag of 20
Påse(ar)
3.2mm 1.6mm Black Heat Shrink No 2:1 300mm Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS-artikelnummer 666-874
VarumärkeRS PRO
264,91 kr
1 Box of 20
Låda(or)
3.2mm 1.6mm Black Heat Shrink No 2:1 20m Polyolefin Yes No - UL
Related Products
The RNF-100 Series of heat shrink tubing has ...
Description:
The RNF-100 Series of heat shrink tubing has specifically been designed to be used in challenging and demanding environments. It is extensively used for commercial and military applications due to its ability to provide excellent insulation and strain relief to ...
The HFT5000 Series of heat shrinkable fabric has ...
Description:
The HFT5000 Series of heat shrinkable fabric has been designed for use by providing cable protection, insulation, as well as environmental sealing and strain relief across a number of different applications such as:. • Aerospace and Defence• Automotive Industry• Industrial ...
Glenair full nelson lipped right angle heatshrink boots, ...
Description:
Glenair full nelson lipped right angle heatshrink boots, series 77 type 1 are semi rigid high performance elastomer boots with excellent resistance to fuels, oils and various solvents with superior high temperature performance rated for 3000 hours use at +150 ...
Glenair full nelson heatshrink lipped, series 77 type ...
Description:
Glenair full nelson heatshrink lipped, series 77 type 1 semi rigid elastomer boots offer excellent solvent, fuel and oil resistance and have superb extreme temperature resilience, rated for 3000 hours at +150 deg C. These heat shrink boots fit most ...