Eaton 2P Pole Isolator Switch - 20A Maximum Current, 6.5kW Power Rating, IP65

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Switch power/capacity refers to AC23A use at 380-440V

This non-fused isolator switch from Eaton improves safety in your electrical system thanks to its failsafe shutdown features. It’s designed for manual circuit isolation using its single throw rotary handle and locking ring. With its compact measurements of 137 (L) x 80 (W) x 110mm (D), this unit is easy to install in both small and large industrial setups. It's an ideal choice for circuit boards and transmission lines. For additional safety and user control, you can add up to three padlocks to the switch when it's turned off.

• Operating temperature range from -25°C to +50°C for use in harsh environments
• Screw terminal type for quick installation and reliable connections
• Ingress protection rating of IP65 for protection against dust, liquid splashes and condensation

This disconnector switch features a maximum voltage rating of 440V AC, making it ideal for use in high-energy industrial systems.

Yes, this isolator switch is completely insulted in an impact-resistant thermoplastic body.