- RS-artikelnummer:
- 468-541
- Tillv. art.nr:
- T2P16MC1LZ / 192990-0100
- Tillverkare / varumärke:
- ITT Cannon
5980 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 10)
8,402 kr
(exkl. moms)
10,502 kr
(inkl. moms)
Enheter | Per unit | Per Pack* |
10 - 10 | 8,402 kr | 84,02 kr |
20 - 30 | 8,238 kr | 82,38 kr |
40 - 50 | 8,074 kr | 80,74 kr |
60 - 70 | 7,899 kr | 78,99 kr |
80 + | 7,636 kr | 76,36 kr |
- RS-artikelnummer:
- 468-541
- Tillv. art.nr:
- T2P16MC1LZ / 192990-0100
- Tillverkare / varumärke:
- ITT Cannon
Lagstiftning och ursprungsland
Produktdetaljer
Crimp Two Piece Contacts
Note
To maintain IP67 rating wire insulation diameters should be within the following diameters: Signal wires: 1.7-2.7mm Power wires: 2.7-4mm.
Use plier or ratchet style tool to crimp signal contacts. Use ratchet tool only to crimp power contacts.
Use plier or ratchet style tool to crimp signal contacts. Use ratchet tool only to crimp power contacts.
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Specifikationer
Attribute | Value |
---|---|
Gender | Male |
For Use With | Trident Circular Connector Housing |
Series | Trident |
Minimum Wire Size mm² | 0.5mm² |
Maximum Wire Size mm² | 1.5mm² |
Termination Method | Crimp |
Contact Plating | Gold |
Maximum Wire Size AWG | 16AWG |
Contact Material | Brass |
Maximum Contact Resistance | 5 mΩ |
Minimum Operating Temperature | -55 °C |
Maximum Operating Temperature | +125 °C |