SICK Inductive Threaded Barrel Proximity Sensor, M8, 1.5 mm Detection, PNP NO, 10 → 30 V dc

RS-artikelnummer:: 209-2490
Tillv. art.nr:: IMP08-1B5PSVU2S
Tillverkare / varumärke:: SICK

SICK Inductive Threaded Barrel Proximity Sensor, M8, 1.5 mm Detection, PNP NO, 10 → 30 V dc

Antal (1 enhet)*

3 313,00 kr

(exkl. moms)

4 141,25 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

1 enhet(er) är redo att levereras

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet
1 +	3 313,00 kr

*vägledande pris

RS-artikelnummer:: 209-2490
Tillv. art.nr:: IMP08-1B5PSVU2S
Tillverkare / varumärke:: SICK

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	SICK
	Thread Size	M8
	Sensor Technology	Inductive
	Body Style	Threaded Barrel
	Detection Range	1.5 mm
	Digital Switching Output Type	PNP
	Output Function	NO
	Cable Length	2m
	Connection Type	Pre-Cabled
	Supply Voltage	10 → 30 V dc
	Length	30mm
	IP Rating	IP68
	Mounting Type	Flush
	Width	8mm
	Housing Material	Stainless Steel
	Maximum DC Voltage	30V
	Minimum Operating Temperature	-25°C
	Switching Frequency	800 Hz
	Switching Current	200 mA
	Maximum Switching Frequency	800Hz
	Shielding	Shielded
	Maximum Operating Temperature	+100°C
	Series	IMP08
	Reverse Polarity Protection	Yes
	Short Circuit Overload Protection	Yes

	Välj alla
	Brand SICK
	Thread Size M8
	Sensor Technology Inductive
	Body Style Threaded Barrel
	Detection Range 1.5 mm
	Digital Switching Output Type PNP
	Output Function NO
	Cable Length 2m
	Connection Type Pre-Cabled
	Supply Voltage 10 → 30 V dc
	Length 30mm
	IP Rating IP68
	Mounting Type Flush
	Width 8mm
	Housing Material Stainless Steel
	Maximum DC Voltage 30V
	Minimum Operating Temperature -25°C
	Switching Frequency 800 Hz
	Switching Current 200 mA
	Maximum Switching Frequency 800Hz
	Shielding Shielded
	Maximum Operating Temperature +100°C
	Series IMP08
	Reverse Polarity Protection Yes
	Short Circuit Overload Protection Yes

COO (Country of Origin):: CN

Overview

At a glance

Types: M5, M8, M12 and M14
Extended sensing ranges: 1 mm to 3 mm
Electrical configuration: DC 3- and 4-wire
Enclosure rating: IP 68
Temperature range: –25 °C to +100 °C
Stainless steel housing with active surface made from stable high-performance ceramic
Pressure resistant up to 500 bar, gas-tight front
Expected service life of up to 1 million pressure cycles

Your Benefit

Reduced maintenance costs
Extremely resilient and durable
Up to 50 times longer service life compared to conventional sensors under pressure cycles
Simple compensation of cylinder tolerances
Simple integration due to small design

The inductive, high-pressure-resistant IMP sensors are perfectly suited for the query of end positions in hydraulic cylinders. The use of state-of-the-art ASIC and manufacturing technologies from SICK sets new standards in installation size, service life and load capability for the sensors. Due to the stable stainless steel housing and an active high-performance ceramic surface, they are pressure-resistant up to 500 bar. Above-average system throughput is a matter of course for the range of models M5, M8, M12 and M14 thanks to 1 million tested pressure cycles.

Applications

End position detection of a piston stroke in hydraulic cylinders

Controlled piston deceleration
Increased piston service life due to collision prevention at the end of the work cycle

Note

Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.