Pulley 76mm Outside Diameter, 10.1mm Bore

  • RS-artikelnummer 352-0721
  • Tillv. art.nr AF10MDP75/2N/D
  • Tillverkare / varumärke BNL
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

BNL Pulley

Acetal pulleys with stainless steel or carbon steel balls as standard.

Features and Benefits

• Medium duty pulley • Acetal impervious to water
• Pulley 1449418 has Stainless Steel ball bearings
• Excellent performance

Product Application Information

Carbon steel - Can be used in dry applications Stainless steel - Can be used in damp applications with mild detergents

Prefixes

AC - Caged AF - Full complement

Single & Double Row Bearing

Acetal pulleys offer long term wear performance and excellent dimensional stability when subjected to load, temperature and most fluids. Working temperature range: -40°C to +100°C. Balls are either Carbon Steel or Stainless Steel; the latter is more suited to wet applications as it is non-corrosive.

Specifikationer
Attribute Value
Number of Grooves 2
Overall Diameter 76mm
Pulley Width 20mm
Bore 10.1mm
Material Acetal
33 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
105,17 kr
(exkl. moms)
131,46 kr
(inkl. moms)
Enheter
Per unit
1 - 4
105,17 kr
5 - 9
102,00 kr
10 +
98,62 kr
Related Products
These pulleys are designed to be used with ...
Description:
These pulleys are designed to be used with synchronous classic timing belts and are manufactured from high strength material. They are easily re-bored to the required shaft size. 5.1mm ( 1/5 in.) pitchSuitable for belts 6.4mm ( 1/4 in.) and ...
8mm pitch x 30mm wide beltManufactured from high ...
Description:
8mm pitch x 30mm wide beltManufactured from high strength steelDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft size.
Manufacture of pulleys conforms to ISO 4183Compatible with ...
Description:
Manufacture of pulleys conforms to ISO 4183Compatible with all manufactured HTD® beltsDesigned to be used with appropriate taper.
Suitable for use on drives for belt speeds ...
Description:
Suitable for use on drives for belt speeds of up to 40 metres per second. Compatible with all manufactured V & Wedge Belts, designed to be used with appropriate Taper Bushes. All conform to ISO 4183.